Open to Trade and DIY Customers Dismiss
Bondloc has been formulating and manufacturing Anaerobic Adhesives & Sealants, Instant Adhesives and Structural Acrylics/Epoxy resins for the Engineering, Automotive, Marine, Transport and Agricultural Industries for nearly 20 years.
Showing 1–12 of 29 results
£8.50 Including Tax
( £7.08 Excluding Tax )
Bondloc B2001 is a hand kneadable, specialty epoxy putty that mixes for permanent repairs to many substrates. Contains fading black dye that becomes grey after mixing. May be applied under water (fresh or salt). Bonds to fibreglass, metal, wood, concrete and glass. Will not yellow to UV exposure. Hardens in 10 minutes, back in service…
£7.19 Including Tax
( £5.99 Excluding Tax )
Bondloc B2012 is a 2-part, rapid cold curing epoxy adhesive, that is suitable for bonding a wide variety of surfaces including steel, aluminium and galvanised iron. Reacts within a few minutes to give a tough, resilient bond on a wide variety of surfaces. Specifications: Mix Ratio: 1:1Work Life: As a mix: 4 1/2 – 5…
£6.19 Including Tax
( £5.16 Excluding Tax )
Bondloc B2013 is a steel-filled epoxy putty for general maintenance, repairs, filling, rebuilding and bonding metal surfaces. Specifications: Colour: BlackMixed Viscosity: Putty% Solids by Volume: 100Cured Density: 2.33 gm/ccCure Shrinkage ASTM D2566: 0.0006 in/inSpecific Volume: 11.9 in/lbPot Life: 45 minutesComprehensive Strength ASTM D695: 8,260 PSIAdhesive Tensile Strength EASTMD1002: 2,800 PSICured Hardness Shore D ASTM 2240:…
£7.14 Including Tax
( £5.95 Excluding Tax )
Bondloc B2060 is a 60 second, 2-part, rapid cold curing epoxy adhesive. It is suitable for bonding a wide variety of surfaces including steel, aluminium and galvanised iron. It reacts within a minute to give a tough resilient bond on a wide variety of surfaces. Specifications: Mix Ratio 1:1Work Life as a Mix: 40 –…
£6.34 Including Tax
( £5.28 Excluding Tax )
Bondloc B222 Screwlock is a Thixotropic anaerobic threadlocker of low strength designed for easy disassembly of treated components. B222’s Anaerobic nature allows it to cure only when confined between metal parts.
Applications include all small fasteners, where vibration loosening prevention and non-leakage through threaded fastening is required. Ideal on small set screws, brass and most types of small threaded nuts, bolts, screws, hex and slot driven components including keyed fasteners etc.
Specifications:
Resin: Dimethacrylate
Colour: Purple White tint
Cure speed with Activator: <15 mins @ 20°C
Cure speed without Activator: 15 minutes
Viscosity- Brookfield Sp3 @ 20rpm: 1200 cps (thixo), Sp3 @ 20rpm: 5000cps
Gap Fill/Max Threadform: 0.5mm/M36
Flash Point: >100°C
Shelf Life: 12 months @ 20°C
Specific Gravity: 1.06
Cured performance:
Full Cure Time: 12 hours @ 20°C
Typical Strength: ISO 10964: 6Nm M10’s
Range of Strength: Breakaway: 4Nm up to 12Nm, Prevailing: 2Nm up to 6 Nm
DIN 54454 Breakloose: 10Nm max 20Nm
DIN 54454 Prevailing: 6Nm up to 20Nm
£26.99 Including Tax
( £22.49 Excluding Tax )
Bondloc B222 Screwlock is a Thixotropic anaerobic threadlocker of low strength designed for easy disassembly of treated components. B222’s Anaerobic nature allows it to cure only when confined between metal parts.
Applications include all small fasteners, where vibration loosening prevention and non-leakage through threaded fastening is required. Ideal on small set screws, brass and most types of small threaded nuts, bolts, screws, hex and slot driven components including keyed fasteners etc.
Specifications:
Resin: Dimethacrylate
Colour: Purple White tint
Cure speed with Activator: <15 mins @ 20°C
Cure speed without Activator: 15 minutes
Viscosity- Brookfield Sp3 @ 20rpm: 1200 cps (thixo), Sp3 @ 20rpm: 5000cps
Gap Fill/Max Threadform: 0.5mm/M36
Flash Point: >100°C
Shelf Life: 12 months @ 20°C
Specific Gravity: 1.06
Cured performance:
Full Cure Time: 12 hours @ 20°C
Typical Strength: ISO 10964: 6Nm M10’s
Range of Strength: Breakaway: 4Nm up to 12Nm, Prevailing: 2Nm up to 6 Nm
DIN 54454 Breakloose: 10Nm max 20Nm
DIN 54454 Prevailing: 6Nm up to 20Nm
£5.98 Including Tax
( £4.98 Excluding Tax )
Bondloc B243 is an Anaerobic formulation designed to be used on parts in an as received condition, such as those with protective films (oils) etc.
Oil tolerant B243 is designed for direct application onto as received parts where a light oily film exists or where surrounding parts contamination is a problem in maintenance.
Specifications:
Resin: Mod Methacrylate
Colour: Blue Thixotropic
Cure speed: <15 mins @ 20°C
Viscosity: 1200-1800 thixotropic
Gap fill: 0.1mm
Flash Point: >85°C
Shelf life: 12 months @ 20°C
Specific gravity: 1.04
Max. Operating Temperature: -53°C to + 150°C
Cured Performance:
Full Cure Time: 24 hours
Typical Breakaway Strength: 12 N/mm²
Typical Prevailing Strength: 8-10N/mm²
£26.98 Including Tax
( £22.48 Excluding Tax )
Bondloc B243 is an Anaerobic formulation designed to be used on parts in an as received condition, such as those with protective films (oils) etc.
Oil tolerant B243 is designed for direct application onto as received parts where a light oily film exists or where surrounding parts contamination is a problem in maintenance.
Specifications:
Resin: Mod Methacrylate
Colour: Blue Thixotropic
Cure speed: <15 mins @ 20°C
Viscosity: 1200-1800 thixotropic
Gap fill: 0.1mm
Flash Point: >85°C
Shelf life: 12 months @ 20°C
Specific gravity: 1.04
Max. Operating Temperature: -53°C to + 150°C
Cured Performance:
Full Cure Time: 24 hours
Typical Breakaway Strength: 12 N/mm²
Typical Prevailing Strength: 8-10N/mm²
£5.98 Including Tax
( £4.98 Excluding Tax )
Bondloc B270 Studlock is a permanent green coloured general-purpose adhesive for permanent threaded assemblies. B270 locks studs up to 1in, sealing against leakage and corrosion. It is chemical-resistant, resisting fuels, lubricants and most industrial liquids and gases.
It eliminates double nutting and/or welding of critical assemblies. It also permits reduced casting thickness and ultimate lightness, reduced assembly stress and eliminates cracked castings due to interference fit stresses.
Specifications:
Resin: Dimethacrylate
Colour: Green
Fixture Speed No Activator: 10 min.
Fixture Speed With Activator: 5 min.
Viscosity: 500 cps
Gap fill: 0.25mm
Flash Point: >100°C
Shelf Life: minimum 12 month
Specific Gravity: 1.06.
Max Operating Temperature: -55°C to +180°C
Cured Performance:
Full Cure Time: 12 hours.
Cure Time with good % of final strength: 2 hours
Typical Breakaway Strength DIN : 40 Nm (25/55)
Typical Prevailing Strength DIN : 55 Nm (45/70)
Typical Breakaway ISO 10964: 26 Nm (16/36)
Typical Prevailing ISO 10964: 36 Nm (22/50)
£26.98 Including Tax
( £22.48 Excluding Tax )
Bondloc B270 Studlock is a permanent green coloured general-purpose adhesive for permanent threaded assemblies. B270 locks studs up to 1in, sealing against leakage and corrosion. It is chemical-resistant, resisting fuels, lubricants and most industrial liquids and gases.
It eliminates double nutting and/or welding of critical assemblies. It also permits reduced casting thickness and ultimate lightness, reduced assembly stress and eliminates cracked castings due to interference fit stresses.
Specifications:
Resin: Dimethacrylate
Colour: Green
Fixture Speed No Activator: 10 min.
Fixture Speed With Activator: 5 min.
Viscosity: 500 cps
Gap fill: 0.25mm
Flash Point: >100°C
Shelf Life: minimum 12 month
Specific Gravity: 1.06.
Max Operating Temperature: -55°C to +180°C
Cured Performance:
Full Cure Time: 12 hours.
Cure Time with good % of final strength: 2 hours
Typical Breakaway Strength DIN : 40 Nm (25/55)
Typical Prevailing Strength DIN : 55 Nm (45/70)
Typical Breakaway ISO 10964: 26 Nm (16/36)
Typical Prevailing ISO 10964: 36 Nm (22/50)
£8.12 Including Tax
( £6.77 Excluding Tax )
Bondloc B3294 is a toughened structural adhesive formulated for bonding dissimilar substrates as well as unprepared metals, ceramics, wood, concrete and standard thermoset plastics. The final adhesive bond is designed to be load-bearing and resistant to weathering, humidity and wide temperature variations. Applications: Outdoor weathering or solvent exposure thermoformed plastic assemblies, PVC, fibreglass, vinyls, ABS,…
£17.99 Including Tax
( £14.99 Excluding Tax )
Bondloc B401 is a Medium Viscosity Cyanoacrylate. It bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of ‘superglues’….
