Showing 277–288 of 1360 results
-
£186.30 Including Tax
( £155.25 Excluding Tax )
The DEWALT DCF922 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with detent pin for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance.
* Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.
* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.
* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.
* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off.
Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions.
Specifications:
Bit Holder: 1/2in Detent Pin.
No Load Speed: 2,500/min.
Impact Rate: 3,600/bpm.
Max. Fastening Torque: 406Nm.
Nut Busting Torque: 610Nm.
Weight: 1.1kg (without battery).
-
£353.28 Including Tax
( £294.40 Excluding Tax )
The DEWALT DCF922 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with detent pin for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance.
* Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.
* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.
* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.
* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off.
Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions.
Specifications:
Bit Holder: 1/2in Detent Pin.
No Load Speed: 2,500/min.
Impact Rate: 3,600/bpm.
Max. Fastening Torque: 406Nm.
Nut Busting Torque: 610Nm.
Weight: 1.1kg (without battery).
-
£186.30 Including Tax
( £155.25 Excluding Tax )
The DEWALT DCF923 XR Impact Wrench has an efficient brushless motor and 3/8in square drive with hog ring for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates…
-
£310.50 Including Tax
( £258.75 Excluding Tax )
The DEWALT DCF961 High Torque Impact Wrench is ideal for heavy-duty fastening applications. Its efficient brushless motor delivers high performance, extends tool life and allows for much shorter design. After 4 seconds of impacting, the tool automatically provides an increase in power to aid in loosening stubborn fasteners. The 4 mode membrane switch allows for…
-
£356.03 Including Tax
( £296.69 Excluding Tax )
The DEWALT DCF964N 3/4in High Torque Impact Wrench is ideal for heavy-duty fastening applications. Its efficient brushless motor delivers high performance, extends tool life and allows for much shorter design. After 4 seconds of impacting, the tool automatically provides an increase in power to aid in loosening stubborn fasteners. The 4 mode membrane switch allows…
-
£637.56 Including Tax
( £531.30 Excluding Tax )
The DEWALT DCFS950 Brushless XR Fencing Stapler is the first dedicated fencing stapler that features a powerful single flywheel system taken from our most powerful cordless nailer. Sequential mode enables careful exact placement and higher accuracy whilst stapling. RAPIDCYCLE™ mode is intended for quick repetitive operation. Dry fire lockout ensures that the tool is protected from firing without nails in the magazine.
Designed for agricultural, industrial or civil engineering support, it will drastically reduce the time it takes to install wire fencing perimeters.
Specifications:
Nail Length: 40-50mm.
Nail Diameter: 4mm.
Magazine Capacity: 35 Nails.
Weight: 4.1kg.
-
£782.21 Including Tax
( £651.84 Excluding Tax )
The DEWALT DCFS950 Brushless XR Fencing Stapler is the first dedicated fencing stapler that features a powerful single flywheel system taken from our most powerful cordless nailer. Sequential mode enables careful exact placement and higher accuracy whilst stapling. RAPIDCYCLE™ mode is intended for quick repetitive operation. Dry fire lockout ensures that the tool is protected from firing without nails in the magazine.
Designed for agricultural, industrial or civil engineering support, it will drastically reduce the time it takes to install wire fencing perimeters.
Specifications:
Nail Length: 40-50mm.
Nail Diameter: 4mm.
Magazine Capacity: 35 Nails.
Weight: 4.1kg.
-
£371.22 Including Tax
( £309.35 Excluding Tax )
The DEWALT DCG200T2 XR FlexVolt Wall Chaser offers unrivalled run time and performance. Heavy-duty construction applications can be completed without the need for mains power. The high torque, brushless motor is perfect for wall chasing applications. The 2 diamond discs have been engineered to cut simultaneously into material. There is also an easy-to-use tool-free blade height adjustment setting with park position.
Once the in-between material is removed, the channel can be used to sink wires or pipes below the surface. The Wireless Tool Control (WTC) transmitter allows the tool to be wirelessly paired with another WTC device such as a dust extractor, enabling automatic activation and shutdown.
Specifications:
No Load Speed: 9,000/min.
Cutting Depth: 0-32mm.
Max. Groove Width: 35mm.
Disc Size: 125mm.
Weight: 3.7kg.
-
£605.82 Including Tax
( £504.85 Excluding Tax )
The DEWALT DCG200T2 XR FlexVolt Wall Chaser offers unrivalled run time and performance. Heavy-duty construction applications can be completed without the need for mains power. The high torque, brushless motor is perfect for wall chasing applications. The 2 diamond discs have been engineered to cut simultaneously into material. There is also an easy-to-use tool-free blade height adjustment setting with park position.
Once the in-between material is removed, the channel can be used to sink wires or pipes below the surface. The Wireless Tool Control (WTC) transmitter allows the tool to be wirelessly paired with another WTC device such as a dust extractor, enabling automatic activation and shutdown.
Specifications:
No Load Speed: 9,000/min.
Cutting Depth: 0-32mm.
Max. Groove Width: 35mm.
Disc Size: 125mm.
Weight: 3.7kg.
-
£173.88 Including Tax
( £144.90 Excluding Tax )
The DEWALT DCG405FN XR Brushless Grinder has a flat head design for access to acute angles with a compact gear case for increased access to tight spaces. The powerful fan cooled motor is fitted with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces…
-
£142.56 Including Tax
( £118.80 Excluding Tax )
The DEWALT DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall.
The two position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released.
Specifications:
No Load Speed: 9,000/min.
Disc Diameter: 125mm, M14 Spindle.
Weight: 1.75kg.
-
£288.42 Including Tax
( £240.35 Excluding Tax )
The DEWALT DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall.
The two position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released.
Specifications:
No Load Speed: 9,000/min.
Disc Diameter: 125mm, M14 Spindle.
Weight: 1.75kg.
