Showing 37–48 of 69 results
-
£242.81 Including Tax
( £202.34 Excluding Tax )
IRWIN Record Arm Adjusted High-Tensile Bolt Cutters have jaws that are specially heat-treated for cutting very hard materials up to a hardness of Brinell 500 (Rockwell C52, 110 tons/square in).
The centre cut jaws have a short nose for trouble-free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high-tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire.
-
£292.52 Including Tax
( £243.77 Excluding Tax )
IRWIN Record Arm Adjusted High-Tensile Bolt Cutters have jaws that are specially heat-treated for cutting very hard materials up to a hardness of Brinell 500 (Rockwell C52, 110 tons/square in).
The centre cut jaws have a short nose for trouble-free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high-tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire.
-
£403.61 Including Tax
( £336.34 Excluding Tax )
IRWIN Record Arm Adjusted High-Tensile Bolt Cutters have jaws that are specially heat-treated for cutting very hard materials up to a hardness of Brinell 500 (Rockwell C52, 110 tons/square in).
The centre cut jaws have a short nose for trouble-free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high-tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire.
-
£35.74 Including Tax
( £29.78 Excluding Tax )
IRWIN Record A151 is a useful tool for convex curves. The malleable iron handles are virtually unbreakable and designed for a lifetimes use. The fully adjustable cutter is manufactured from top quality tool steel to create and retain a keen cutting edge. Specification Cutter Width: 60mm (2.3/8in).Length: 250mm (10in).
-
£35.74 Including Tax
( £29.78 Excluding Tax )
IRWIN Record A151R is for concave surfaces useful shaping tool for curved surfaces.The malleable iron handles are virtually unbreakable and designed for a lifetimes use. Fully adjustable cutter made from top quality tool steel to create and retain a keen cutting edge. Specification Type: Round.Cutter Width: 60mm (2.3/8in).Length: 250mm (10in).
-
£28.96 Including Tax
( £24.13 Excluding Tax )
IRWIN Record 130N clamp heads. A bar clamp of any length can be easily made using a piece of timber 1in thick. Cast iron head and slides incorporating large thrust surfaces. High-quality steel handle and screw with pin attached by welded chain.
-
£187.13 Including Tax
( £155.94 Excluding Tax )
This IRWIN Record Multipurpose Vice is strong and durable, the body and sliding jaw are cast from close-grained grey iron which is machined on all friction surfaces for a smooth reliable action. The jaws, handle and main screw are steel, the latter having a two-start rolled acme thread to speed the jaws from fully closed…
-
£115.78 Including Tax
( £96.48 Excluding Tax )
IRWIN Record Jack Plane is manufactured to uncompromisingly high standards and is suitable for both hard and soft woods. Supplied with a 2in tungsten vanadium cutter blade.
Designed for the initial preparation of rough timber, the long base bridging undulations which a shorter plane would tend to follow.
RECSP5: Plastic Handle (Economy).
REC05: Wooden Handle.
Width: 50mm (2in).
Length: 355mm (14in).
-
£94.63 Including Tax
( £78.86 Excluding Tax )
IRWIN Record 060 1/2 Block Plane is specially made to deal with plastic laminates and other man-made materials besides wood. Cutter set at 12.5° with mouth adjustments for coarse or fine work and end grain. Fully adjustable for depth of cut with cutter held firmly by lever and cam. Cutter Width: 42mm (1.5/8 in).Length: 152mm…
-
£94.63 Including Tax
( £78.86 Excluding Tax )
IRWIN Record 09 1/2 Adjustable Block Plane ideal for end grain and general-purpose finishing. Fully adjustable for depth of cut with a screw adjusted cutter head by lever and cam. Lateral adjustment and mouth adjustments for coarseor fine work and a 21° cutter angle. Cutter Width: 42mm (1.5/8 in).Length: 152mm (6 in).
-
£73.52 Including Tax
( £61.27 Excluding Tax )
IRWIN® Record® Mechanic’s Vice is rigid and robust. The body and sliding jaw are cast from close grained grey iron which is machined on all friction surfaces for a smooth, reliable action. Fitted with hardened steel jaws for extended life, they can be replaced when worn. The main steel screw has a two-start rolled acme thread for faster and smoother operation.
It has a fused steel handle that will bend before the vice can be overstressed. The safety stop prevents the slide from being separated from the body.
The most popular and widely used general purpose vice for light to medium-duty applications.
A full line of replacement parts are available.
-
£568.61 Including Tax
( £473.84 Excluding Tax )
The IRWIN® Record® Fitter’s Vice is a medium-duty vice for industrial fitting and training workshops where work ranges from small fitting and filing work to the assembly and fitting of larger components.
The lever adjustment allows instant movement of the jaws through a half-nut mechanism working in conjunction with the threaded screw. (quick release).
Supplied with hardened steel replaceable jaw plates.
