Showing 109–120 of 277 results
-
£29.58 Including Tax
( £24.65 Excluding Tax )
These Knipex external bent circlip pliers are made with a special tool steel construction with plastic coated handles for added comfort, durability and most importantly added grip. The Knipex circlip plier range comes in internal, external, straight and bent versions.
These Knipex 49 21 series external circlip pliers with 90° bent tips are ideal for confined areas. With the slim head style design, they are constructed from chrome vanadium electric steel forged with precision non-slip tips for added strength and durability.
Like most of the Knipex range of pliers, all components are oil hardened with polished heads and plastic coated handles.
Knipex circlip pliers are ideal for all trade or DIY applications and especially the automotive trade.
-
£59.70 Including Tax
( £49.75 Excluding Tax )
The Knipex Farriers’ Pincers have a small head and anvil for redirecting horseshoe-nails. Also suitable for dismantling work in vehicle body workshops. The cutting edges are additionally hardened, approx. 59 HRC.
-
£60.83 Including Tax
( £50.69 Excluding Tax )
61 01 Series Bolt End Cutting 85° Nippers with dipped PVC handles and a high cutting capacity as result of optimal transmission of power applied. Particularly efficient for fence construction with almost flush cutting of bolts, nails etc. Cutting edges with additional inductive hardening, edge hardness approx. 64HRC. Specifications: Cutting Capacity: Piano: 3.0mm, Hard: 3.5mm,…
-
£54.82 Including Tax
( £45.68 Excluding Tax )
Knipex 64 Series Precision End Cutting Nippers with multi-component grips. Ideal for ultra fine cutting work, e. g. in electronics and fine mechanics. They have a smooth operating box joint with zero backlash. Such joints are characterised by the fact that the inner handle is guided on both sides by two extensive bearing surfaces. This prevents the tilting movements which occur with lap joints, and has a positive effect on the quality of cutting processes and tool life.
In addition to oil hardening of the entire pliers, the cutting edges are induction hardened to at least 60 HRC. The low friction double spring is an advantage ergonomically. It produces a gentle, steady opening after cutting.
They have a mirror polish and a fine oil film for corrosion protection. With occasional re-oiling of the surface, this rust protection is completely sufficient for workshop operation. As a result, for safety reasons these electronics pliers are also ideal for sensitive electronics environments. There are no pieces of chrome that could peel off and damage circuits. The quality machining of the pliers corresponds to the needs of electronics and micromechanics: high requirements regarding precision, function and reliability.
-
£53.88 Including Tax
( £44.90 Excluding Tax )
Knipex 64 Series Precision End Cutting Nippers with multi-component grips. Ideal for ultra fine cutting work, e. g. in electronics and fine mechanics. They have a smooth operating box joint with zero backlash. Such joints are characterised by the fact that the inner handle is guided on both sides by two extensive bearing surfaces. This prevents the tilting movements which occur with lap joints, and has a positive effect on the quality of cutting processes and tool life.
In addition to oil hardening of the entire pliers, the cutting edges are induction hardened to at least 60 HRC. The low friction double spring is an advantage ergonomically. It produces a gentle, steady opening after cutting.
They have a mirror polish and a fine oil film for corrosion protection. With occasional re-oiling of the surface, this rust protection is completely sufficient for workshop operation. As a result, for safety reasons these electronics pliers are also ideal for sensitive electronics environments. There are no pieces of chrome that could peel off and damage circuits. The quality machining of the pliers corresponds to the needs of electronics and micromechanics: high requirements regarding precision, function and reliability.
-
£34.32 Including Tax
( £28.60 Excluding Tax )
Knipex 67 01 Series High Leverage End Cutting Nippers have cutting edges suitable for soft, hard and piano wire. High cutting capacity with little required effort due to optimum co-ordination of cutting edge angle and transmission ratio.
Made from forged heavy-duty chrome vanadium steel that has been oil-hardened, multiple times. Black atramentized finish with a polished head. The cutting edges have been additionally induction hardened, approx. 64 HRC. Fitted with plastic coated handles for increased comfort.
Cutting Capacity Ø:
67 01 140: Soft 4mm, Medium-Hard 3.1mm, Hard 2mm, Piano Wire 1.5mm
67 01 160: Soft 4.5mm, Medium-Hard 3.4mm, Hard 2.5mm, Piano Wire 2mm
67 01 200: Soft 5mm, Medium-Hard 3.8mm, Hard 3mm, Piano Wire: 2.5mm
-
£35.74 Including Tax
( £29.78 Excluding Tax )
Knipex 67 01 Series High Leverage End Cutting Nippers have cutting edges suitable for soft, hard and piano wire. High cutting capacity with little required effort due to optimum co-ordination of cutting edge angle and transmission ratio.
Made from forged heavy-duty chrome vanadium steel that has been oil-hardened, multiple times. Black atramentized finish with a polished head. The cutting edges have been additionally induction hardened, approx. 64 HRC. Fitted with plastic coated handles for increased comfort.
Cutting Capacity Ø:
67 01 140: Soft 4mm, Medium-Hard 3.1mm, Hard 2mm, Piano Wire 1.5mm
67 01 160: Soft 4.5mm, Medium-Hard 3.4mm, Hard 2.5mm, Piano Wire 2mm
67 01 200: Soft 5mm, Medium-Hard 3.8mm, Hard 3mm, Piano Wire: 2.5mm
-
£43.73 Including Tax
( £36.44 Excluding Tax )
Knipex 67 01 Series High Leverage End Cutting Nippers have cutting edges suitable for soft, hard and piano wire. High cutting capacity with little required effort due to optimum co-ordination of cutting edge angle and transmission ratio.
Made from forged heavy-duty chrome vanadium steel that has been oil-hardened, multiple times. Black atramentized finish with a polished head. The cutting edges have been additionally induction hardened, approx. 64 HRC. Fitted with plastic coated handles for increased comfort.
Cutting Capacity Ø:
67 01 140: Soft 4mm, Medium-Hard 3.1mm, Hard 2mm, Piano Wire 1.5mm
67 01 160: Soft 4.5mm, Medium-Hard 3.4mm, Hard 2.5mm, Piano Wire 2mm
67 01 200: Soft 5mm, Medium-Hard 3.8mm, Hard 3mm, Piano Wire: 2.5mm
-
£14.24 Including Tax
( £11.87 Excluding Tax )
Knipex 68 01 Series End Cutting Pliers with dipped plastic coated handles. Ideal for hard and soft wire cutting. The edges are separately induction-hardened to a hardness of 60 HRc. Also suitable for twisting, binding and cutting soft and annealed tie wire used on reinforcing rods.
-
£19.13 Including Tax
( £15.94 Excluding Tax )
Knipex 68 01 Series End Cutting Pliers with dipped plastic coated handles. Ideal for hard and soft wire cutting. The edges are separately induction-hardened to a hardness of 60 HRc. Also suitable for twisting, binding and cutting soft and annealed tie wire used on reinforcing rods.
-
£23.12 Including Tax
( £19.27 Excluding Tax )
Knipex 68 01 Series End Cutting Pliers with dipped plastic coated handles. Ideal for hard and soft wire cutting. The edges are separately induction-hardened to a hardness of 60 HRc. Also suitable for twisting, binding and cutting soft and annealed tie wire used on reinforcing rods.
-
£21.04 Including Tax
( £17.53 Excluding Tax )
Knipex 68 01 Series End Cutting Pliers with dipped plastic coated handles. Ideal for hard and soft wire cutting. The edges are separately induction-hardened to a hardness of 60 HRc. Also suitable for twisting, binding and cutting soft and annealed tie wire used on reinforcing rods.
