Showing 2989–3000 of 3872 results
-
£22.63 Including Tax
( £18.86 Excluding Tax )
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dirt, and scale.
The brush with steel wire is used for flexible work on large steel surfaces. The high-grade ‘Made in Germany’ quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders.
Features of the wire brushes are their dense filling and precise concentricity.
-
£25.55 Including Tax
( £21.29 Excluding Tax )
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dirt, and scale.
The brush with steel wire is used for flexible work on large steel surfaces. The high-grade ‘Made in Germany’ quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders.
Features of the wire brushes are their dense filling and precise concentricity.
-
£27.88 Including Tax
( £23.23 Excluding Tax )
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dirt, and scale.
The brush with steel wire is used for flexible work on large steel surfaces. The high-grade ‘Made in Germany’ quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders.
Features of the wire brushes are their dense filling and precise concentricity.
-
£39.24 Including Tax
( £32.70 Excluding Tax )
The Makita 194385-5 Plunge Saw Clamp Set has been designed for use with the Makita SP6000 Plunge Saw. These clamps are mainly used when using the saw in conjunction with a guide rail. They hold the guide rail/material securely in place.
-
£24.68 Including Tax
( £20.57 Excluding Tax )
The Makita 198885-7 Guide Rail Connector is made from durable steel for long life. They slide into channels on top and bottom of the guide rail for increased precision and accuracy versus single connector models. Installs quickly and easily with the included Hex Wrench. For use with Makita guide rails, two sets of connectors are…
-
£18.71 Including Tax
( £15.59 Excluding Tax )
The Makita B-28606-10 Screw Bit Set 37 Piece contains the following: 5 x 25mm Pozidriv Bits: PZ0, PZ1, PZ2 (x2) and PZ3.5 x 25mm Phillips Bits: PH0, PH1, PH2 (x2) and PH3.4 x 25mm Hex Bits: H3, H4, H5 and H6.11 x 25mm Torx Bits: T10, T15(x2), T20(x2), T25(x2), T27, T30(x2) and T40.7 x 25mm…
-
£33.48 Including Tax
( £27.90 Excluding Tax )
Makita MAKBLADE Mitre Saw Blades are fully hardened and tensioned so they absorb the impact, and remain flat/true. Made from high-grade tungsten carbide with low wear rate for extended blade life. Precision honed tips for a sharper, longer-lasting edge. The thin kerf helps to reduce waste and motor pressure.
Can be used with both mains and battery powered mitre saws.
-
£65.59 Including Tax
( £54.66 Excluding Tax )
The Makita B-33015 Blade has been specifically for use with plunge type saws. Patented vibration dampening allows the blade to run truer with less wobble, easily plunging into material with little effort. Suitable for cutting both wood and aluminium, they are especially designed for a smooth clean cut. Specifications: Blade Diameter: 165mm.Bore: 20mm.Kerf: 2.2mm.Rake: 8°.Thickness:…
-
£117.42 Including Tax
( £97.85 Excluding Tax )
The Makita Specialized for Aluminium Cutting Blade provides excellent cutting performance in aluminium, copper, brass, bronze and other non-ferrous metals. Suitable for use with portable, mitre and table saws, it features precision plate tensioning for a flatter blade and truer cuts.
The blades are also suitable for working on plastics and laminated wood.
-
£62.87 Including Tax
( £52.39 Excluding Tax )
Makita Specialized for Metal Cutting Saw Blades have been designed for fast, clean cuts in mild steel, sheet, pipe, channel and threaded rod. Specially formulated carbide is combined with a special tip design to resist breakage on impact and to provide increased life.
These blades are low sparking with minimal dust production for cool cuts with burr free edges.
-
£53.45 Including Tax
( £44.54 Excluding Tax )
The Makita B-33532 Specialized Blade has been designed to extend battery life and run time when used with cordless saws. The precision honed tungsten teeth provide a fine cut in wood. Ultra-thin, perfectly tensioned steel plates enable a true run. Specifications: Blade Diameter: 136mm.Bore Size (Arbor Diameter): 20mm.Kerf Dimension: 1.5mm.Tooth Quantity: 16.Rake Angle: 20°.
-
£94.38 Including Tax
( £78.65 Excluding Tax )
Makita Specialized Blade for cutting fibre cement board including Hardie board, Marley weatherboard and compressed concrete, one of the fastest-growing, environmentally friendly materials in the construction industry. Polycrystalline diamond tipped teeth provide increased durability and longer life. Smoother, cleaner and more accurate cutting. Delivers outstanding performance results when compared to a TCT blade or Diamond Continuous…
