Open to Trade and DIY Customers Dismiss
Showing 181–192 of 199 results
£51.98 Including Tax
( £43.32 Excluding Tax )
Trend PH/JIG/C Twin Pocket Hole Jig for new projects, strengthening and repair work in materials from 12.7mm to 38mm thick. With hardened, full-length drill guides for precision pockets and a long life span. A magnetic clamp plate aids location of the jig when clamping. Fast setup with easy adjustments for different component sizes. It can…
£4.88 Including Tax
( £4.07 Excluding Tax )
The Trend Rota – Tip Replacement Screws are tapered head replacement screws for Trend Rota- Tip router cutters. They are high quality replacement screws providing the correct fixings to secure the Rota-Tip blades for maximum performance.The Torx head fitting ensure secure tightening pressure when fitting blades, the 6mm tapered head provide correct clamping pressure to…
£114.48 Including Tax
( £95.40 Excluding Tax )
The Trend SET/SS31X1/4TC Router Cutter Set contains a range of popular tungsten carbide tipped cutters for a variety of applications. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in an aluminium carry case. Contains: 9 x Non-bearing Straight Cutters: 5 x 12mm, 6 x 20mm, 8 x 20mm, 10 x 20mm, 12 x 20mm,…
£128.78 Including Tax
( £107.32 Excluding Tax )
The Trend SET/SS35X1/2TC TCT Router Cutter Set contains a range of popular tungsten carbide tipped cutters for a variety of applications. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in aluminium carry case. Contains: 1 x Single Flute Cutter 3.2 x 12.7mm 5 x Straight Cutters: 6.3 x 19mm, 9.5 x 25mm, 12.7 x…
£81.42 Including Tax
( £67.85 Excluding Tax )
Trend SET/SS9TC 15 Piece Router Bit Starter Set contains a range of popular 1/2in tungsten carbide tipped cutters for a variety of applications. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in a plastic carry case. Contains: 1 x Single Flute: 4.8 x 11mm.3 x Two Flute: 6.3 x 19mm, 12.7 x 25mm and…
£41.54 Including Tax
( £34.62 Excluding Tax )
The Trend PH/JIG/BS Single Pocket Hole Jig is for fast and accurate joining of solid timber and plywood giving strong instant joints in single or multiple fixing positions. It can help to build cabinets, furniture and small joinery projects with ease. The hardened drilling sleeves provide accurate, consistent pockets. There is also a handy built-in…
£57.96 Including Tax
( £48.30 Excluding Tax )
Trend 12 Piece Router Bit Starter Set contains a range of the most widely used cutters for decorative woodworking. Made from tungsten carbide with 1/4in shanks and supplied in a plastic carry case. Contains: 2 x Straight: 6.3 x 16mm and 12.7 x 19mm.1 x Dovetail: 104° x 1/2in.2 x Guided Round Over: R6.35mm and…
£45.88 Including Tax
( £38.23 Excluding Tax )
This robust T-Square in Tufnol provides an instant means of squaring off, marking out, setting up jigs etc. Can be hung up when not in use. Length: 680mm.
£17.36 Including Tax
( £14.47 Excluding Tax )
Hinge Sinkers for drilling machines. TCT Hinge sinking cutter for pillar drills only. Designed for recessing holes in melamine covered chipboard to receive circular hinges. Diameter. 35mm.Shank. 8mm.
£37.52 Including Tax
( £31.27 Excluding Tax )
The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board. Diameter – 35mmShank – 1/4in
£31.08 Including Tax
( £25.90 Excluding Tax )
Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.
Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.
Uses:
Trimming plastic or plywood overlay.
Copy profiling – use the bearing to follow a template or base edge of board.
A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
Tooling Tungsten Carbide
1/2in Shank.
£31.08 Including Tax
( £25.90 Excluding Tax )
Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.
Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.
Uses:
Trimming plastic or plywood overlay.
Copy profiling – use the bearing to follow a template or base edge of board.
A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
Tooling Tungsten Carbide
1/2in Shank.
