Open to Trade and DIY Customers Dismiss
Showing 1237–1248 of 6331 results
£39.10 Including Tax
( £32.58 Excluding Tax )
Diafold whetstones feature a carrying case that unfolds into a permanently attached handle. When folded, this carrying case protects the tool’s surface.
When unfolded, the handle facilitates ease of use. It reaches virtually anywhere where there is an edge to be honed. The length of the sharpening area is 110mm.
£36.89 Including Tax
( £30.74 Excluding Tax )
Diamond File Crystal Saver, smoothes sharp jagged edges on any glass. Simply moisten the file, rub back and forth with the round side in recessed edges and then with the flat side on sharp raised corners. Generally only a few strokes are needed.325grit.
£18.05 Including Tax
( £15.04 Excluding Tax )
The W7 Mini Diamond Whetstone can be used to sharpen, hone or file any hard material. Unbreakable, unbendable, and convenient to carry.
Handy Mini Whetstone 70 x 25 x 5mm thick.
No messy oils needed, sharpen dry or with water. Durable construction will provide years of consistent performance and reliable service
£18.05 Including Tax
( £15.04 Excluding Tax )
The W7 Mini Diamond Whetstone can be used to sharpen, hone or file any hard material. Unbreakable, unbendable, and convenient to carry.
Handy Mini Whetstone 70 x 25 x 5mm thick.
No messy oils needed, sharpen dry or with water. Durable construction will provide years of consistent performance and reliable service
£50.86 Including Tax
( £42.38 Excluding Tax )
The W7 Mini Diamond Whetstone can be used to sharpen, hone or file any hard material. Unbreakable, unbendable, and convenient to carry.
Handy Mini Whetstone 70 x 25 x 5mm thick.
No messy oils needed, sharpen dry or with water. Durable construction will provide years of consistent performance and reliable service
£18.05 Including Tax
( £15.04 Excluding Tax )
The W7 Mini Diamond Whetstone can be used to sharpen, hone or file any hard material. Unbreakable, unbendable, and convenient to carry.
Handy Mini Whetstone 70 x 25 x 5mm thick.
No messy oils needed, sharpen dry or with water. Durable construction will provide years of consistent performance and reliable service
£18.05 Including Tax
( £15.04 Excluding Tax )
The W7 Mini Diamond Whetstone can be used to sharpen, hone or file any hard material. Unbreakable, unbendable, and convenient to carry.
Handy Mini Whetstone 70 x 25 x 5mm thick.
No messy oils needed, sharpen dry or with water. Durable construction will provide years of consistent performance and reliable service
£159.19 Including Tax
( £132.66 Excluding Tax )
Dormer 14pc Set, features E500 straight flute taps and A002 TiN Coated Jobber Drills is ideal for a wide range of general purpose machining applications. It features the Dormer E500 straight flute taps and A002 TiN coated jobber drills. E500 Metric coarse straight flute taps: M3, M4, M5, M6, M8, M10 & M12 Straight flute…
£17.52 Including Tax
( £14.60 Excluding Tax )
Dormer E500 straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required.
Extremely versatile, can tap through or blind holes in most materials. When tapping blind holes straight flute taps should be used in sets. The three taps which form a set are known by more than one name.
1. Taper or First tap
2. Second or Intermediate tap
3. Bottoming, third or plug tap.
Metric coarse straight flute taps.
Tolerance: Class 2 for 6H Fit
Surface treatment: Bright
Material: HSS High Speed Steel
Chamfer No: 1,2 and 3, Serial no 4 and 5
Flute Geometry: Straight Flutes
ISO529
£17.52 Including Tax
( £14.60 Excluding Tax )
Dormer E500 straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required.
Extremely versatile, can tap through or blind holes in most materials. When tapping blind holes straight flute taps should be used in sets. The three taps which form a set are known by more than one name.
1. Taper or First tap
2. Second or Intermediate tap
3. Bottoming, third or plug tap.
Metric coarse straight flute taps.
Tolerance: Class 2 for 6H Fit
Surface treatment: Bright
Material: HSS High Speed Steel
Chamfer No: 1,2 and 3, Serial no 4 and 5
Flute Geometry: Straight Flutes
ISO529
£17.52 Including Tax
( £14.60 Excluding Tax )
Dormer E500 straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required.
Extremely versatile, can tap through or blind holes in most materials. When tapping blind holes straight flute taps should be used in sets. The three taps which form a set are known by more than one name.
1. Taper or First tap
2. Second or Intermediate tap
3. Bottoming, third or plug tap.
Metric coarse straight flute taps.
Tolerance: Class 2 for 6H Fit
Surface treatment: Bright
Material: HSS High Speed Steel
Chamfer No: 1,2 and 3, Serial no 4 and 5
Flute Geometry: Straight Flutes
ISO529
£24.00 Including Tax
( £20.00 Excluding Tax )
Dormer E500 straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required.
Extremely versatile, can tap through or blind holes in most materials. When tapping blind holes straight flute taps should be used in sets. The three taps which form a set are known by more than one name.
1. Taper or First tap
2. Second or Intermediate tap
3. Bottoming, third or plug tap.
Metric coarse straight flute taps.
Tolerance: Class 2 for 6H Fit
Surface treatment: Bright
Material: HSS High Speed Steel
Chamfer No: 1,2 and 3, Serial no 4 and 5
Flute Geometry: Straight Flutes
ISO529
