Open to Trade and DIY Customers Dismiss
Showing 85–96 of 1965 results
£16.22 Including Tax
( £13.52 Excluding Tax )
Bondloc Flange Seal Type B515 is a purple, smooth, thick paste. Easily applied, cures once confined between the parts to form in place a tough, flexible gasket. Gives an instant low pressure seal. Used for fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, engine timing cam…
£16.49 Including Tax
( £13.74 Excluding Tax )
Bondloc Gasket Seal Type B518 is a Red, smooth, thick paste. Easily applied, cures once confined between the parts to form in place a tough, flexible gasket. Gives an instant low pressure seal. Used for fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, engine timing cam…
£5.98 Including Tax
( £4.98 Excluding Tax )
Bondloc B542 Hydraulic Seal is a thixotropic liquid which cures anaerobically to form a tough, high pressure seal on all types of threaded couplings used on low, medium and high pressure lines.
Used for all types of hydraulic connections, and sealing against typical pressure line ratings. Can also be used to fit valves, threaded couplings, adaptors, quick disconnect parts, compression fittings and vibration proofing joints.
Specifications:
Resin: Dimethacrylate.
Colour: Brown.
Fixture Speed No Activator: 10 – 20 mins.
Fixture Speed With Activator: <5 mins.
Spindle 2 @ 2.5 rpm: 1000 to 2750 cps.
Spindle 2 @ 20rpm: 400 to 800 cps.
Gap fill: 0.05mm to 0.25 mm.
Flash point: >100°C.
Shelf life: 2 Years @ 20°C.
Specific gravity: 1.06.
Max operating temp: -55°C to + 150°C.
Cured Performance:
Full Cure Time: 12 hours.
Typical breakway ISO 10964: 15 N.m.
Typical prevailing ISO 10964: >8 N.m.
DIN 10964 Breakloose: 24 N.m.
DIN 10964 Prevailing: 15 to 35 N.m.
Typical Break and Prevailing: 20N.m/15N.m.
£26.98 Including Tax
( £22.48 Excluding Tax )
Bondloc B542 Hydraulic Seal is a thixotropic liquid which cures anaerobically to form a tough, high pressure seal on all types of threaded couplings used on low, medium and high pressure lines.
Used for all types of hydraulic connections, and sealing against typical pressure line ratings. Can also be used to fit valves, threaded couplings, adaptors, quick disconnect parts, compression fittings and vibration proofing joints.
Specifications:
Resin: Dimethacrylate.
Colour: Brown.
Fixture Speed No Activator: 10 – 20 mins.
Fixture Speed With Activator: <5 mins.
Spindle 2 @ 2.5 rpm: 1000 to 2750 cps.
Spindle 2 @ 20rpm: 400 to 800 cps.
Gap fill: 0.05mm to 0.25 mm.
Flash point: >100°C.
Shelf life: 2 Years @ 20°C.
Specific gravity: 1.06.
Max operating temp: -55°C to + 150°C.
Cured Performance:
Full Cure Time: 12 hours.
Typical breakway ISO 10964: 15 N.m.
Typical prevailing ISO 10964: >8 N.m.
DIN 10964 Breakloose: 24 N.m.
DIN 10964 Prevailing: 15 to 35 N.m.
Typical Break and Prevailing: 20N.m/15N.m.
£16.49 Including Tax
( £13.74 Excluding Tax )
Bondloc B572 White Pipe Seal is designed for the locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. The thixotropic nature reduces the migration of liquid product after application to the substrate….
£17.45 Including Tax
( £14.54 Excluding Tax )
Bondloc B574 is an Instant Gasket material that forms in place, making almost any size and shape, replacing paper, cork etc. It eliminates relaxation and on loads loss. The assembled parts are usually suitable for immediate Low Pressure ( 6 bar) service and once cured can resist 350 Bar Pressure depending on gap size. Suitable…
£18.12 Including Tax
( £15.10 Excluding Tax )
Bondloc B577 Pipe Seal is a high viscosity thixotropic gel paste which cures rapidly, sealing instantly to 10 bar through its Anaerobic cure system in contact with metals in the absence of air (oxygen). When fully cured it resists pressure up to 350 bar. B577 is not suitable for oxygen systems. Good chemical/solvent resistance to…
£25.44 Including Tax
( £21.20 Excluding Tax )
Bondloc B603 is an anaerobic formulation designed for direct use on as received parts such as those with protective films. It is an Oil tolerant retainer and is designed for direct application onto as received parts where a light oily film exists or where surrounding parts contamination is a problem in maintenance. Specifications: Resin: Mod….
£5.98 Including Tax
( £4.98 Excluding Tax )
Bondloc B638 Retainer is designed to give high strength retention under cyclic loading. It can retain its full strength and not suffer fatigue under load stress.
It is a cylindrical parts supplement, suited to structural components such as cylindrical parts under dynamic load, keys, splines, even structural tubing with close tolerance fit.
Specifications:
Resin: Urethane Acrylate.
Colour: Green.
Fixture Speed No Activator: 5 mins.
Fixture Speed With Activator: <5 mins.
Viscosity: 2500 cps.
Gap fill: 0.2mm.
Flash Point: >85°C.
Shelf Life: 12 months min.
Specific Gravity: 1.08.
Max Operating Temperature: -55°C to + 150°C.
Cured Performance:
Full Cure Time: 24 hours.
Static shear strength: 30 N/mm².
£26.98 Including Tax
( £22.48 Excluding Tax )
Bondloc B638 Retainer is designed to give high strength retention under cyclic loading. It can retain its full strength and not suffer fatigue under load stress.
It is a cylindrical parts supplement, suited to structural components such as cylindrical parts under dynamic load, keys, splines, even structural tubing with close tolerance fit.
Specifications:
Resin: Urethane Acrylate.
Colour: Green.
Fixture Speed No Activator: 5 mins.
Fixture Speed With Activator: <5 mins.
Viscosity: 2500 cps.
Gap fill: 0.2mm.
Flash Point: >85°C.
Shelf Life: 12 months min.
Specific Gravity: 1.08.
Max Operating Temperature: -55°C to + 150°C.
Cured Performance:
Full Cure Time: 24 hours.
Static shear strength: 30 N/mm².
£5.98 Including Tax
( £4.98 Excluding Tax )
Bondloc B641 is a single part anaerobic securing compound, designed for fitting cylindrical metal assemblies and cures when confined between the parts.
It will secure all types and sizes of bearings, shafts and cylindrical parts which will require disassembly in the future. It is medium strength and is colour-coded yellow for job identification.
Specifications:
Resin: Mod. Dimethacrylate.
Colour: Yellow.
Fixture Speed No Activator: 10-15 mins.
Fixture Speed With Activator: <5 mins.
Viscosity: 400-800 cps.
Gap fill: 0.2 mm.
Flash Point: >100°C.
Shelf Life: 12 month min.
Specific Gravity: 1.06.
Max Operating Temperature: -55°C to + 150°C.
Cured Performance:
Full Cure Time: 12 hours.
Static shear strength: 12N/mm².
ISO 10123 pin/collars range: 1-16 N/mm(²).
£26.98 Including Tax
( £22.48 Excluding Tax )
Bondloc B641 is a single part anaerobic securing compound, designed for fitting cylindrical metal assemblies and cures when confined between the parts.
It will secure all types and sizes of bearings, shafts and cylindrical parts which will require disassembly in the future. It is medium strength and is colour-coded yellow for job identification.
Specifications:
Resin: Mod. Dimethacrylate.
Colour: Yellow.
Fixture Speed No Activator: 10-15 mins.
Fixture Speed With Activator: <5 mins.
Viscosity: 400-800 cps.
Gap fill: 0.2 mm.
Flash Point: >100°C.
Shelf Life: 12 month min.
Specific Gravity: 1.06.
Max Operating Temperature: -55°C to + 150°C.
Cured Performance:
Full Cure Time: 12 hours.
Static shear strength: 12N/mm².
ISO 10123 pin/collars range: 1-16 N/mm(²).
