Showing 1–12 of 27 results
-
£39.14 Including Tax
( £32.62 Excluding Tax )
Knipex 35 Series Electronics Pliers for fine assembly work, e g. in electronics and fine mechanics. With smooth ground gripping surfaces. The edges have been carefully deburred making them ideal for gripping, holding and bending.
Made from ball bearing chrome steel, oil hardened with a polish/mirror polish finish, together with a fine film of oil to offer effective rust protection. No circuit faults caused by peeling chrome from plated tools. Fitted with ergonomic multi-component grips for added grip and comfort.
-
£39.14 Including Tax
( £32.62 Excluding Tax )
Knipex 35 Series Electronics Pliers for fine assembly work, e g. in electronics and fine mechanics. With smooth ground gripping surfaces. The edges have been carefully deburred making them ideal for gripping, holding and bending.
Made from ball bearing chrome steel, oil hardened with a polish/mirror polish finish, together with a fine film of oil to offer effective rust protection. No circuit faults caused by peeling chrome from plated tools. Fitted with ergonomic multi-component grips for added grip and comfort.
-
£42.49 Including Tax
( £35.41 Excluding Tax )
Knipex 35 22 Series Electronics Half Round Pliers are fitted with electrically discharging handles (dissipative). The jaws feature smooth, ground gripping surfaces with carefully deburred edges. Low friction double spring for gentle smooth closing and opening. With a polish/mirror polish finish, together with a fine film of oil to offer effective rust protection. No circuit faults caused…
-
£40.42 Including Tax
( £33.68 Excluding Tax )
These Knipex 35 32 Series precision electronics round nose pliers with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. For very fine installation work in electronics and fine mechanics used for gripping, folding and bending. Smooth ground gripping surfaces with carefully deburred edges. Low friction double spring…
-
£54.82 Including Tax
( £45.68 Excluding Tax )
Knipex 64 Series Precision End Cutting Nippers with multi-component grips. Ideal for ultra fine cutting work, e. g. in electronics and fine mechanics. They have a smooth operating box joint with zero backlash. Such joints are characterised by the fact that the inner handle is guided on both sides by two extensive bearing surfaces. This prevents the tilting movements which occur with lap joints, and has a positive effect on the quality of cutting processes and tool life.
In addition to oil hardening of the entire pliers, the cutting edges are induction hardened to at least 60 HRC. The low friction double spring is an advantage ergonomically. It produces a gentle, steady opening after cutting.
They have a mirror polish and a fine oil film for corrosion protection. With occasional re-oiling of the surface, this rust protection is completely sufficient for workshop operation. As a result, for safety reasons these electronics pliers are also ideal for sensitive electronics environments. There are no pieces of chrome that could peel off and damage circuits. The quality machining of the pliers corresponds to the needs of electronics and micromechanics: high requirements regarding precision, function and reliability.
-
£53.88 Including Tax
( £44.90 Excluding Tax )
Knipex 64 Series Precision End Cutting Nippers with multi-component grips. Ideal for ultra fine cutting work, e. g. in electronics and fine mechanics. They have a smooth operating box joint with zero backlash. Such joints are characterised by the fact that the inner handle is guided on both sides by two extensive bearing surfaces. This prevents the tilting movements which occur with lap joints, and has a positive effect on the quality of cutting processes and tool life.
In addition to oil hardening of the entire pliers, the cutting edges are induction hardened to at least 60 HRC. The low friction double spring is an advantage ergonomically. It produces a gentle, steady opening after cutting.
They have a mirror polish and a fine oil film for corrosion protection. With occasional re-oiling of the surface, this rust protection is completely sufficient for workshop operation. As a result, for safety reasons these electronics pliers are also ideal for sensitive electronics environments. There are no pieces of chrome that could peel off and damage circuits. The quality machining of the pliers corresponds to the needs of electronics and micromechanics: high requirements regarding precision, function and reliability.
-
£47.23 Including Tax
( £39.36 Excluding Tax )
Knipex 75 02 Series Electronic Diagonal Cutters for ultra fine cutting work, e. g. in electronics and fine mechanics. With sharp, ground cutting edges. The cutting edges have been additionally induction-hardened, approx. 62 HRC. Made from high-grade special tool steel, forged, multi stage oil-hardened with a bolted joint for high precision and stress tolerance. There…
-
£46.87 Including Tax
( £39.06 Excluding Tax )
Knipex 77 Series electronic diagonal cutter with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. Ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish, together with a fine film of oil, offer effective rust protection – no circuit faults caused by peeling chrome from plated tools. 57 HRC.
-
£52.90 Including Tax
( £44.08 Excluding Tax )
Knipex 77 12 Series Electronic Diagonal Cutters with a round head, bevel and lead catcher – no uncontrolled loss of cut wire ends. For fine cutting work, e.g. in electronics and fine mechanics. Made from ball bearing chrome steel, oil hardened. Additionally laser hardened, cutter hardness at least 60 HRC. With a polish/mirror polish finish,…
-
£46.52 Including Tax
( £38.77 Excluding Tax )
Knipex Series 77 Electronic Diagonal Cutters with a round head, non-bevelled. Ideal for fine cutting work, e.g. in electronics and fine mechanics. Precision-ground cutting edges for flush cutting and low friction double spring for gentle smooth closing and opening. The cutting edges are separately induction hardened to approximately 62HRc. Made from ball bearing chrome steel,…
-
£50.42 Including Tax
( £42.02 Excluding Tax )
Knipex 77 Series electronic diagonal cutter with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. Ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish, together with a fine film of oil, offer effective rust protection – no circuit faults caused by peeling chrome from plated tools. 57 HRC.
-
£50.14 Including Tax
( £41.78 Excluding Tax )
Knipex 77 Series electronic diagonal cutter with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. Ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish, together with a fine film of oil, offer effective rust protection – no circuit faults caused by peeling chrome from plated tools. 57 HRC.
