Open to Trade and DIY Customers Dismiss
Showing 3673–3684 of 3883 results
£26.48 Including Tax
( £22.07 Excluding Tax )
This Trend 47/4 x 1/4 TCT Pierce & Trim Cutter will pierce and cut out an aperture in laminate worktops. The base of the cutter acts as a guide follower. Specifications: Single Flute cutter.Cutting Length: 18mm.Diameter: 6.3mm.Shank. 1/4in.
£29.60 Including Tax
( £24.67 Excluding Tax )
Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges.Corners will require final trimming square with a hand chisel or a corner chisel. Diameter: 12.7mm.Cutting length: 19mm.Shank: 1/4in.
£21.76 Including Tax
( £18.13 Excluding Tax )
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots
All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice.
HSSE.
One Flute helical Plunge-slotting bit.
£24.12 Including Tax
( £20.10 Excluding Tax )
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots
All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice.
HSSE.
One Flute helical Plunge-slotting bit.
£21.76 Including Tax
( £18.13 Excluding Tax )
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots
All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice.
HSSE.
One Flute helical Plunge-slotting bit.
£33.43 Including Tax
( £27.86 Excluding Tax )
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots
All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice.
HSSE.
One Flute helical Plunge-slotting bit.
£35.74 Including Tax
( £29.78 Excluding Tax )
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots
All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice.
HSSE.
One Flute helical Plunge-slotting bit.
£17.88 Including Tax
( £14.90 Excluding Tax )
Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended.
Should not be used for extensive periods or heavy work.
£17.88 Including Tax
( £14.90 Excluding Tax )
Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended.
Should not be used for extensive periods or heavy work.
£8.72 Including Tax
( £7.27 Excluding Tax )
Replacement bearing to suit all Trend bearing guided router cutters.
The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
£5.18 Including Tax
( £4.32 Excluding Tax )
Replacement bearing to suit all Trend bearing guided router cutters.
The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
£11.72 Including Tax
( £9.77 Excluding Tax )
Trend Jointing Biscuits are made of laminated beech which is compressed before being die-cut. Beechwood biscuits expand up to 20% when in contact with wood adhesives.
Biscuit jointing has been proven to be one of the strongest, fastest, safest and most accurate ways to join hardwood, softwood, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise.
