Trend SNAP/PC/38 Plug Cutter 3/8in
£16.51 Including Tax
( £13.76 Excluding Tax )
Plug cutter for cutting plugs in Wood. Made from Tool Steel. Can be used in Snappy Quick chucks or directly in a standard chuck.
Showing 3781–3792 of 3883 results
-
-
Trend SNAP/QC Quick Chuck
£16.51 Including Tax
( £13.76 Excluding Tax )
The Quick Chuck will fit any power drill that uses a standard 9.5 mm (3/8in) key or keyless chuck. Attachments such as the snappy range or direct drive 1/4in screwdriver bits will then snap in and out without a chuck key. The Quick Chuck has six flats on the shank to ensure non-slippage in the…
-
Trend SNAP/TH2/SET Tool Holder Bit Set, 60 Piece
£139.13 Including Tax
( £115.94 Excluding Tax )
Trend Snappy Tool Holder is supplied with the Snappy Quick Change Chuck for fast, efficient bit swaps ensuring increased productivity and performance. Includes a selection of accessories for drilling in wood, masonry and steel, plus specialist bits for specific tasks such as lock fitting and metalwork applications. Supplied in a heavy-duty fabric tool holder. Contains:…
-
Trend SS8TC 1/4in TCT Router Bit Starter Set, 12 Piece
£57.96 Including Tax
( £48.30 Excluding Tax )
Trend 12 Piece Router Bit Starter Set contains a range of the most widely used cutters for decorative woodworking. Made from tungsten carbide with 1/4in shanks and supplied in a plastic carry case. Contains: 2 x Straight: 6.3 x 16mm and 12.7 x 19mm.1 x Dovetail: 104° x 1/2in.2 x Guided Round Over: R6.35mm and…
-
Trend T-Square
£45.88 Including Tax
( £38.23 Excluding Tax )
This robust T-Square in Tufnol provides an instant means of squaring off, marking out, setting up jigs etc. Can be hung up when not in use. Length: 680mm.
-
Trend T32 Micro Filter Bags (Pack 5)
£35.41 Including Tax
( £29.51 Excluding Tax )
Trend T32 Micro Filter Bag has multiple inner layers that collect coarse dust and dirt particles whilst protecting the outer layer from clogging. The bag material has a greater air-permeable structure when compared to paper filter bags, providing increased suction. For dry use only. Supplied as a pack of 5.
-
Trend T420/35 x 8mm TCT Hinge Sinking 35mm Diameter
£17.36 Including Tax
( £14.47 Excluding Tax )
Hinge Sinkers for drilling machines. TCT Hinge sinking cutter for pillar drills only. Designed for recessing holes in melamine covered chipboard to receive circular hinges. Diameter. 35mm.Shank. 8mm.
-
Trend T421/35 x 1/4 TCT Hinge Sinking Bit 35mm Diameter
£37.52 Including Tax
( £31.27 Excluding Tax )
The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board. Diameter – 35mmShank – 1/4in
-
Trend T46/01 x 1/2 TCT 90° Template Profiler 12.7 x 25mm
£31.08 Including Tax
( £25.90 Excluding Tax )
Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.
Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.
Uses:
Trimming plastic or plywood overlay.
Copy profiling – use the bearing to follow a template or base edge of board.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
Tooling Tungsten Carbide
1/2in Shank. -
Trend T46/01 x 1/4 TCT 90° Template Profiler 12.7 x 25mm
£31.08 Including Tax
( £25.90 Excluding Tax )
Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.
Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.
Uses:
Trimming plastic or plywood overlay.
Copy profiling – use the bearing to follow a template or base edge of board.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
Tooling Tungsten Carbide
1/2in Shank. -
Trend TR12 x 1/4 TCT Two Flute Cutter Long Shank 12 x 19mm
£30.34 Including Tax
( £25.28 Excluding Tax )
Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life.
They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods.
The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications.
-
Trend TR17D x 1/2 TCT Two Flute Workshop Cutter Long Shank 12.7 x 50mm
£35.83 Including Tax
( £29.86 Excluding Tax )
Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life.
They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods.
The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications.