Showing 145–156 of 159 results
-
£28.82 Including Tax
( £24.02 Excluding Tax )
Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.
1/2in shank for heavier workloads, ideal for router table work and for use in bigger routers. The ‘K’ mark shank ensures safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.
-
£36.53 Including Tax
( £30.44 Excluding Tax )
Trend CraftPro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations.
PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work.
-
£38.32 Including Tax
( £31.93 Excluding Tax )
Trend CraftPro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations.
PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work.
-
£136.38 Including Tax
( £113.65 Excluding Tax )
The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters. The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing post-formed joints with worktop jigs in tops up to 40mm thick. It cuts crisp and clean precision fit joints every time. Especially suited for use on abrasive chipboard core laminate faced…
-
£362.95 Including Tax
( £302.46 Excluding Tax )
Professional TC Worktop Cutter Two flute cutter with a 12.7 mm (1/2in) diameter.TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Advanced automated grinding improves the carbides resistance to wear.Up to 200% longer life when cutting abrasive materials.Cleaner cut than other existing carbides.Final results & life that makes it the most…
-
£17.36 Including Tax
( £14.47 Excluding Tax )
Hinge Sinkers for drilling machines. TCT Hinge sinking cutter for pillar drills only. Designed for recessing holes in melamine covered chipboard to receive circular hinges. Diameter. 35mm.Shank. 8mm.
-
£37.52 Including Tax
( £31.27 Excluding Tax )
The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board. Diameter – 35mmShank – 1/4in
-
£31.08 Including Tax
( £25.90 Excluding Tax )
Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.
Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.
Uses:
Trimming plastic or plywood overlay.
Copy profiling – use the bearing to follow a template or base edge of board.
A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
Tooling Tungsten Carbide
1/2in Shank.
-
£31.08 Including Tax
( £25.90 Excluding Tax )
Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.
Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.
Uses:
Trimming plastic or plywood overlay.
Copy profiling – use the bearing to follow a template or base edge of board.
A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
Tooling Tungsten Carbide
1/2in Shank.
-
£30.34 Including Tax
( £25.28 Excluding Tax )
Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life.
They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods.
The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications.
-
£35.83 Including Tax
( £29.86 Excluding Tax )
Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life.
They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods.
The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications.
-
£31.96 Including Tax
( £26.63 Excluding Tax )
Trend TR29 Trade range Shank mounted guided profiler with extra long shank ideal for trimming and profiling timber, man-made board. Features 2 mm micrograin tungsten carbide tips, for cutting the most abrasive materials to give extra long life. The cutter is PTFE coated, indicated by distinctive black colouring. The guide profiler can be used on…
