Showing 13177–13188 of 22465 results
-
£159.70 Including Tax
( £133.08 Excluding Tax )
IRWIN Record Arm Adjusted High-Tensile Bolt Cutters have jaws that are specially heat-treated for cutting very hard materials up to a hardness of Brinell 500 (Rockwell C52, 110 tons/square in).
The centre cut jaws have a short nose for trouble-free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high-tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire.
-
£196.49 Including Tax
( £163.74 Excluding Tax )
IRWIN Record Arm Adjusted High-Tensile Bolt Cutters have jaws that are specially heat-treated for cutting very hard materials up to a hardness of Brinell 500 (Rockwell C52, 110 tons/square in).
The centre cut jaws have a short nose for trouble-free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high-tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire.
-
£242.81 Including Tax
( £202.34 Excluding Tax )
IRWIN Record Arm Adjusted High-Tensile Bolt Cutters have jaws that are specially heat-treated for cutting very hard materials up to a hardness of Brinell 500 (Rockwell C52, 110 tons/square in).
The centre cut jaws have a short nose for trouble-free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high-tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire.
-
£292.52 Including Tax
( £243.77 Excluding Tax )
IRWIN Record Arm Adjusted High-Tensile Bolt Cutters have jaws that are specially heat-treated for cutting very hard materials up to a hardness of Brinell 500 (Rockwell C52, 110 tons/square in).
The centre cut jaws have a short nose for trouble-free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high-tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire.
-
£403.61 Including Tax
( £336.34 Excluding Tax )
IRWIN Record Arm Adjusted High-Tensile Bolt Cutters have jaws that are specially heat-treated for cutting very hard materials up to a hardness of Brinell 500 (Rockwell C52, 110 tons/square in).
The centre cut jaws have a short nose for trouble-free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high-tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire.
-
£35.74 Including Tax
( £29.78 Excluding Tax )
IRWIN Record A151 is a useful tool for convex curves. The malleable iron handles are virtually unbreakable and designed for a lifetimes use. The fully adjustable cutter is manufactured from top quality tool steel to create and retain a keen cutting edge. Specification Cutter Width: 60mm (2.3/8in).Length: 250mm (10in).
-
£35.74 Including Tax
( £29.78 Excluding Tax )
IRWIN Record A151R is for concave surfaces useful shaping tool for curved surfaces.The malleable iron handles are virtually unbreakable and designed for a lifetimes use. Fully adjustable cutter made from top quality tool steel to create and retain a keen cutting edge. Specification Type: Round.Cutter Width: 60mm (2.3/8in).Length: 250mm (10in).
-
£28.96 Including Tax
( £24.13 Excluding Tax )
IRWIN Record 130N clamp heads. A bar clamp of any length can be easily made using a piece of timber 1in thick. Cast iron head and slides incorporating large thrust surfaces. High-quality steel handle and screw with pin attached by welded chain.
-
£187.13 Including Tax
( £155.94 Excluding Tax )
This IRWIN Record Multipurpose Vice is strong and durable, the body and sliding jaw are cast from close-grained grey iron which is machined on all friction surfaces for a smooth reliable action. The jaws, handle and main screw are steel, the latter having a two-start rolled acme thread to speed the jaws from fully closed…
-
£115.78 Including Tax
( £96.48 Excluding Tax )
IRWIN Record Jack Plane is manufactured to uncompromisingly high standards and is suitable for both hard and soft woods. Supplied with a 2in tungsten vanadium cutter blade.
Designed for the initial preparation of rough timber, the long base bridging undulations which a shorter plane would tend to follow.
RECSP5: Plastic Handle (Economy).
REC05: Wooden Handle.
Width: 50mm (2in).
Length: 355mm (14in).
-
£94.63 Including Tax
( £78.86 Excluding Tax )
IRWIN Record 060 1/2 Block Plane is specially made to deal with plastic laminates and other man-made materials besides wood. Cutter set at 12.5° with mouth adjustments for coarse or fine work and end grain. Fully adjustable for depth of cut with cutter held firmly by lever and cam. Cutter Width: 42mm (1.5/8 in).Length: 152mm…
-
£94.63 Including Tax
( £78.86 Excluding Tax )
IRWIN Record 09 1/2 Adjustable Block Plane ideal for end grain and general-purpose finishing. Fully adjustable for depth of cut with a screw adjusted cutter head by lever and cam. Lateral adjustment and mouth adjustments for coarseor fine work and a 21° cutter angle. Cutter Width: 42mm (1.5/8 in).Length: 152mm (6 in).
