Denso Denso Paste 2.5kg Tub
£40.78 Including Tax
( £33.98 Excluding Tax )
Denso Tape Paste is a primer for Denso Tape. It is a rust preventative for exposed metal and for bedding low temperature insulation.
Showing 3673–3684 of 22478 results
-
-
Denso Denso Tape 100mm x 10m Roll
£19.82 Including Tax
( £16.52 Excluding Tax )
Denso Tape is a cold applied tape which remains plastic over a wide temperature range. The tape is non-hardening and non-cracking. It is highly resistant to mineral acids, alkalis, salts and micro-organisms and highly impermeable to water, water vapour and gases.
Application:
Used for the protection of buried or exposed pipes, rods, cables, valves and metal fittings from corrosion.Composition:
Made from non-woven synthetic fibre fabric, which impregnated and coated with a neutral compound based on saturated petroleum hydrocarbons and inert siliceous fillers.Specification:
Breaking strength: 200 N/50mm minimum.
Elongation at break: 10%.
Breakdown voltage: 16kV
Temperature range for application: -5°C to 45°C.
Temperature range for service: 55°C maximum.
Thickness: 1.15mm. -
Denso Denso Tape 50mm x 10m Roll
£9.94 Including Tax
( £8.28 Excluding Tax )
Denso Tape is a cold applied tape which remains plastic over a wide temperature range. The tape is non-hardening and non-cracking. It is highly resistant to mineral acids, alkalis, salts and micro-organisms and highly impermeable to water, water vapour and gases.
Application:
Used for the protection of buried or exposed pipes, rods, cables, valves and metal fittings from corrosion.Composition:
Made from non-woven synthetic fibre fabric, which impregnated and coated with a neutral compound based on saturated petroleum hydrocarbons and inert siliceous fillers.Specification:
Breaking strength: 200 N/50mm minimum.
Elongation at break: 10%.
Breakdown voltage: 16kV
Temperature range for application: -5°C to 45°C.
Temperature range for service: 55°C maximum.
Thickness: 1.15mm. -
Denso Denso Tape 75mm x 10m Roll
£14.89 Including Tax
( £12.41 Excluding Tax )
Denso Tape is a cold applied tape which remains plastic over a wide temperature range. The tape is non-hardening and non-cracking. It is highly resistant to mineral acids, alkalis, salts and micro-organisms and highly impermeable to water, water vapour and gases.
Application:
Used for the protection of buried or exposed pipes, rods, cables, valves and metal fittings from corrosion.Composition:
Made from non-woven synthetic fibre fabric, which impregnated and coated with a neutral compound based on saturated petroleum hydrocarbons and inert siliceous fillers.Specification:
Breaking strength: 200 N/50mm minimum.
Elongation at break: 10%.
Breakdown voltage: 16kV
Temperature range for application: -5°C to 45°C.
Temperature range for service: 55°C maximum.
Thickness: 1.15mm. -
Denso Flashing Tape Grey 100mm x 10m Roll
£13.69 Including Tax
( £11.41 Excluding Tax )
Denso Flashing Tape is a tough but conformable, grey aluminium laminate-coated bitumen adhesive with a high melting point. This new foil laminate gives greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints in service, without the loss of adhesion or splitting.
Uses include:
Flashing repair and instillation, sealing lead sheeting, replacing lead and repairing valley gutters.Adheres to:
Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics.Specifications:
Breaking strength: 4.5 N/mm.
Adhesion strength: 4.5 N/mm width.
Temperature range for application: 5°C to 40°C.
Temperature range for service: 80°C (maximum short term).
Thickness: 1.0mm.
Colour: grey. -
Denso Flashing Tape Grey 150mm x 10m Roll
£20.57 Including Tax
( £17.14 Excluding Tax )
Denso Flashing Tape is a tough but conformable, grey aluminium laminate-coated bitumen adhesive with a high melting point. This new foil laminate gives greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints in service, without the loss of adhesion or splitting.
Uses include:
Flashing repair and instillation, sealing lead sheeting, replacing lead and repairing valley gutters.Adheres to:
Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics.Specifications:
Breaking strength: 4.5 N/mm.
Adhesion strength: 4.5 N/mm width.
Temperature range for application: 5°C to 40°C.
Temperature range for service: 80°C (maximum short term).
Thickness: 1.0mm.
Colour: grey. -
Denso Flashing Tape Grey 225mm x 10m Roll
£30.76 Including Tax
( £25.63 Excluding Tax )
Denso Flashing Tape is a tough but conformable, grey aluminium laminate-coated bitumen adhesive with a high melting point. This new foil laminate gives greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints in service, without the loss of adhesion or splitting.
Uses include:
Flashing repair and instillation, sealing lead sheeting, replacing lead and repairing valley gutters.Adheres to:
Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics.Specifications:
Breaking strength: 4.5 N/mm.
Adhesion strength: 4.5 N/mm width.
Temperature range for application: 5°C to 40°C.
Temperature range for service: 80°C (maximum short term).
Thickness: 1.0mm.
Colour: grey. -
Denso Flashing Tape Grey 300mm x 10m Roll
£41.10 Including Tax
( £34.25 Excluding Tax )
Denso Flashing Tape is a tough but conformable, grey aluminium laminate-coated bitumen adhesive with a high melting point. This new foil laminate gives greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints in service, without the loss of adhesion or splitting.
Uses include:
Flashing repair and instillation, sealing lead sheeting, replacing lead and repairing valley gutters.Adheres to:
Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics.Specifications:
Breaking strength: 4.5 N/mm.
Adhesion strength: 4.5 N/mm width.
Temperature range for application: 5°C to 40°C.
Temperature range for service: 80°C (maximum short term).
Thickness: 1.0mm.
Colour: grey. -
Denso Flashing Tape Grey 75mm x 10m Roll
£10.27 Including Tax
( £8.56 Excluding Tax )
Denso Flashing Tape is a tough but conformable, grey aluminium laminate-coated bitumen adhesive with a high melting point. This new foil laminate gives greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints in service, without the loss of adhesion or splitting.
Uses include:
Flashing repair and instillation, sealing lead sheeting, replacing lead and repairing valley gutters.Adheres to:
Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics.Specifications:
Breaking strength: 4.5 N/mm.
Adhesion strength: 4.5 N/mm width.
Temperature range for application: 5°C to 40°C.
Temperature range for service: 80°C (maximum short term).
Thickness: 1.0mm.
Colour: grey. -
Denso Flashing Tape Primer 1 Litre
£12.40 Including Tax
( £10.33 Excluding Tax )
Denso Flashing Tape Primer is a brush applied solvent-based primer, used for priming surfaces prior to the application of Denso Flashing Tape. Composition: Solution of oxidised bitumen in aromatic hydrocarbon solvent.Cleaning solvent: White spirit. Specifications:Drying time: 20 – 30 minutes. Covering capacity: 7 – 8m² per litre. Application temperature: 0°C to 55°C. Solids content: 58%…
-
Deta Vimark 13A Fuse (Pack Of 4)
£1.28 Including Tax
( £1.07 Excluding Tax )
Pack of 4 Deta Vimark 13A replacement Fuses for use in domestic mains plugs and fused spurs. Always ensure the correct rated fuse is fitted in the plug of an appliance.
-
Deta Vimark Bell Push with Black and White Covers
£8.20 Including Tax
( £6.83 Excluding Tax )
Deta Vimark Bell Push is supplied with two covers, 1 x black and 1 x white, offering flexibility to suit the installation. For use with a wired 240V mains voltage door chime.