Open to Trade and DIY Customers Dismiss
Showing 12493–12504 of 22368 results
£25.96 Including Tax
( £21.63 Excluding Tax )
The Hultafors Forsberg Trekker’s Little Helper™ is a versatile and useful companion for anyone who appreciates being in the wild. It is the perfect protection for your thigh and knee when working with a knife or axe close to your body. It can also be used as a protected place to start a fire, then…
£24.67 Including Tax
( £20.56 Excluding Tax )
The Hultafors Futura Fibreglass Long Tape has an ergonomic closed case design, featuring an integral hand grip which allows fingers to be kept clear of the winding lever when rewinding. A highly flexible fibreglass blade with an additional PVC overcoating, offers superior resistance to scuffing and marking. There is an easy winding, high-impact polymer centre and an ABS belt clip moulded on to the rear of the case. Fitted with a corrosion resistant end-piece.
Made in Britain.
£32.89 Including Tax
( £27.41 Excluding Tax )
The Hultafors Futura Fibreglass Long Tape has an ergonomic closed case design, featuring an integral hand grip which allows fingers to be kept clear of the winding lever when rewinding. A highly flexible fibreglass blade with an additional PVC overcoating, offers superior resistance to scuffing and marking. There is an easy winding, high-impact polymer centre and an ABS belt clip moulded on to the rear of the case. Fitted with a corrosion resistant end-piece.
Made in Britain.
£40.15 Including Tax
( £33.46 Excluding Tax )
The Hultafors H 480 B Aluminium Bending Bar is made with a bent tip. Lighter and easier to work with. Usually used in car workshops to adjust wheel alignment. This smaller bar is easy to store. As aluminium does not rust, it has a better resistance to extreme temperatures and is also more flexible than…
£39.78 Including Tax
( £33.15 Excluding Tax )
The Hultafors H 700 B Aluminium Bending Bar is made with a bent tip. Originally produced to test wheel bearings on cars, but also used by locksmiths to adjust door fittings. As aluminium does not rust, it has a better resistance to extreme temperatures and is also more flexible than steel tools.
£15.08 Including Tax
( £12.57 Excluding Tax )
The Hultafors Hammer and Tool Holder is made from extremely durable ballistic polyester, 1680 Denier, with heavy-duty rivets. It features a multipurpose tool pocket and hammer holder. Fits belts up to 50mm wide. Tested to withstand the most extreme conditions, including temperatures of up to -20⁰C.
£74.53 Including Tax
( £62.11 Excluding Tax )
The Hultafors Hatchet is hand-forged and made from Swedish axe steel using traditional methods in use since 1697. The steel is struck several times, increasing its density and thereby the durability of the axe. It has a clear tempered zone within which the axe can be sharpened whilst not detracting from the strength of the edge. Its curved shaft is made from hickory and treated with linseed oil.
Ideal for use in forests, open land and around the garden.
Supplied with a leather axe sheath.
£82.61 Including Tax
( £68.84 Excluding Tax )
The Hultafors Hatchet is hand-forged and made from Swedish axe steel using traditional methods in use since 1697. The steel is struck several times, increasing its density and thereby the durability of the axe. It has a clear tempered zone within which the axe can be sharpened whilst not detracting from the strength of the edge. Its curved shaft is made from hickory and treated with linseed oil.
Ideal for use in forests, open land and around the garden.
Supplied with a leather axe sheath.
£43.54 Including Tax
( £36.28 Excluding Tax )
The Hultafors HBX-14-11-S Toolbox Saw 350mm is made for increased mobility and flexibility. The 1mm thick, C75 quality steel blade features unique teeth with a 3-phase grinding. A unique Eco-friendly wax coating provides low friction and good rust protection with a minimal environmental impact. Fitted with a durable three-component handle with a comfortable rubber grip….
£50.02 Including Tax
( £41.68 Excluding Tax )
The Hultafors HBX-14-11-T Tenon Saw is made for precision work as well as cutting with miter tools. The 1mm thick, C75 quality steel blade features unique teeth with a 3-phase grinding and a reinforced back for increased stiffness of the saw blade. A unique Eco-friendly wax coating provides low friction and good rust protection with…
£37.70 Including Tax
( £31.42 Excluding Tax )
The Hultafors HBX-22 Handsaw features unique teeth with a 3-phase grinding, combines efficiency and a long life time. Its 1mm thick steel blade has a unique Eco-friendly wax coating provides less friction and reduces power-consuming side vibrations. Narrow blade tip for improved access in tight spaces and for starting a cut in the middle of a board.
Fitted with a durable three-component handle with a comfortable ergonomic grip and 45°/90° angle guide. The handle is mounted to the blade with a stable safety screw which enables changing blade in a simple and reliable way.
Developed for the modern craftsmen in close cooperation with professional users.
Supplied with a unique and durable blade protector, also features a quick release function.
£37.70 Including Tax
( £31.42 Excluding Tax )
The Hultafors HBX-22 Handsaw features unique teeth with a 3-phase grinding, combines efficiency and a long life time. Its 1mm thick steel blade has a unique Eco-friendly wax coating provides less friction and reduces power-consuming side vibrations. Narrow blade tip for improved access in tight spaces and for starting a cut in the middle of a board.
Fitted with a durable three-component handle with a comfortable ergonomic grip and 45°/90° angle guide. The handle is mounted to the blade with a stable safety screw which enables changing blade in a simple and reliable way.
Developed for the modern craftsmen in close cooperation with professional users.
Supplied with a unique and durable blade protector, also features a quick release function.
