Open to Trade and DIY Customers Dismiss
Showing 21589–21600 of 22583 results
£44.90 Including Tax
( £37.42 Excluding Tax )
The Trend AirPro Max THP3 Filter provides respiratory protection to BS EN 12941:1999. Covers all types of dust generated when working in hard and softwoods, ply, MDF and other timber-based materials. Simple to swap over, the filters ensure you are always guaranteed full protection from harmful dust. It has a nominal protection factor of 500.
£8.72 Including Tax
( £7.27 Excluding Tax )
Replacement bearing to suit all Trend bearing guided router cutters.
The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
£5.18 Including Tax
( £4.32 Excluding Tax )
Replacement bearing to suit all Trend bearing guided router cutters.
The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
£11.72 Including Tax
( £9.77 Excluding Tax )
Trend Jointing Biscuits are made of laminated beech which is compressed before being die-cut. Beechwood biscuits expand up to 20% when in contact with wood adhesives.
Biscuit jointing has been proven to be one of the strongest, fastest, safest and most accurate ways to join hardwood, softwood, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise.
£11.72 Including Tax
( £9.77 Excluding Tax )
Trend Jointing Biscuits are made of laminated beech which is compressed before being die-cut. Beechwood biscuits expand up to 20% when in contact with wood adhesives.
Biscuit jointing has been proven to be one of the strongest, fastest, safest and most accurate ways to join hardwood, softwood, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise.
£49.61 Including Tax
( £41.34 Excluding Tax )
Trend Jointing Biscuits are made of laminated beech which is compressed before being die-cut. Beechwood biscuits expand up to 20% when in contact with wood adhesives.
Biscuit jointing has been proven to be one of the strongest, fastest, safest and most accurate ways to join hardwood, softwood, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise.
£11.72 Including Tax
( £9.77 Excluding Tax )
Trend Jointing Biscuits are made of laminated beech which is compressed before being die-cut. Beechwood biscuits expand up to 20% when in contact with wood adhesives.
Biscuit jointing has been proven to be one of the strongest, fastest, safest and most accurate ways to join hardwood, softwood, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise.
£51.58 Including Tax
( £42.98 Excluding Tax )
Trend Jointing Biscuits are made of laminated beech which is compressed before being die-cut. Beechwood biscuits expand up to 20% when in contact with wood adhesives.
Biscuit jointing has been proven to be one of the strongest, fastest, safest and most accurate ways to join hardwood, softwood, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise.
£17.93 Including Tax
( £14.94 Excluding Tax )
The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.
The 1/4in shank for easy control in smaller routers with ‘K’ mark shank to ensure safe working practices.
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
£17.16 Including Tax
( £14.30 Excluding Tax )
The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.
The 1/4in shank for easy control in smaller routers with ‘K’ mark shank to ensure safe working practices.
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
£12.41 Including Tax
( £10.34 Excluding Tax )
The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.
The 1/4in shank for easy control in smaller routers with ‘K’ mark shank to ensure safe working practices.
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
£11.72 Including Tax
( £9.77 Excluding Tax )
The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.
The 1/4in shank for easy control in smaller routers with ‘K’ mark shank to ensure safe working practices.
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
