Dencon Unswitched Socket 2-Gang 13A
£3.17 Including Tax
( £2.64 Excluding Tax )
Dencon White Moulded Plastic Unswitched Socket 13A. Manufactured to BS3676.
Supplied with fixing screws: M3.5 x 20mm.
Showing 3673–3684 of 22583 results
-
-
Dencon USA Travel Adaptor 10A
£1.85 Including Tax
( £1.54 Excluding Tax )
The Dencon Travel Adaptor for UK visitors to the USA. Pins are fixed.
-
Dencon White Ceiling Pull Switch 1-Way 6A
£2.15 Including Tax
( £1.79 Excluding Tax )
Dencon White Moulded Plastic Ceiling Pull Switch 6A. 1 x Dencon White Ceiling Pull Switch 1-Way 6A.
-
Dencon White Finger Plate 1-Gang (Pack of 2)
£1.90 Including Tax
( £1.58 Excluding Tax )
Dencon Moulded Finger Plate. Suitable for flush switches.
-
Dencon White Finger Plate 2-Gang
£2.08 Including Tax
( £1.73 Excluding Tax )
Dencon Moulded Finger Plate. Suitable for flush switches.
-
Denso Denso Paste 2.5kg Tub
£40.78 Including Tax
( £33.98 Excluding Tax )
Denso Tape Paste is a primer for Denso Tape. It is a rust preventative for exposed metal and for bedding low temperature insulation.
-
Denso Denso Tape 100mm x 10m Roll
£19.82 Including Tax
( £16.52 Excluding Tax )
Denso Tape is a cold applied tape which remains plastic over a wide temperature range. The tape is non-hardening and non-cracking. It is highly resistant to mineral acids, alkalis, salts and micro-organisms and highly impermeable to water, water vapour and gases.
Application:
Used for the protection of buried or exposed pipes, rods, cables, valves and metal fittings from corrosion.Composition:
Made from non-woven synthetic fibre fabric, which impregnated and coated with a neutral compound based on saturated petroleum hydrocarbons and inert siliceous fillers.Specification:
Breaking strength: 200 N/50mm minimum.
Elongation at break: 10%.
Breakdown voltage: 16kV
Temperature range for application: -5°C to 45°C.
Temperature range for service: 55°C maximum.
Thickness: 1.15mm. -
Denso Denso Tape 50mm x 10m Roll
£9.94 Including Tax
( £8.28 Excluding Tax )
Denso Tape is a cold applied tape which remains plastic over a wide temperature range. The tape is non-hardening and non-cracking. It is highly resistant to mineral acids, alkalis, salts and micro-organisms and highly impermeable to water, water vapour and gases.
Application:
Used for the protection of buried or exposed pipes, rods, cables, valves and metal fittings from corrosion.Composition:
Made from non-woven synthetic fibre fabric, which impregnated and coated with a neutral compound based on saturated petroleum hydrocarbons and inert siliceous fillers.Specification:
Breaking strength: 200 N/50mm minimum.
Elongation at break: 10%.
Breakdown voltage: 16kV
Temperature range for application: -5°C to 45°C.
Temperature range for service: 55°C maximum.
Thickness: 1.15mm. -
Denso Denso Tape 75mm x 10m Roll
£14.89 Including Tax
( £12.41 Excluding Tax )
Denso Tape is a cold applied tape which remains plastic over a wide temperature range. The tape is non-hardening and non-cracking. It is highly resistant to mineral acids, alkalis, salts and micro-organisms and highly impermeable to water, water vapour and gases.
Application:
Used for the protection of buried or exposed pipes, rods, cables, valves and metal fittings from corrosion.Composition:
Made from non-woven synthetic fibre fabric, which impregnated and coated with a neutral compound based on saturated petroleum hydrocarbons and inert siliceous fillers.Specification:
Breaking strength: 200 N/50mm minimum.
Elongation at break: 10%.
Breakdown voltage: 16kV
Temperature range for application: -5°C to 45°C.
Temperature range for service: 55°C maximum.
Thickness: 1.15mm. -
Denso Flashing Tape Grey 100mm x 10m Roll
£13.69 Including Tax
( £11.41 Excluding Tax )
Denso Flashing Tape is a tough but conformable, grey aluminium laminate-coated bitumen adhesive with a high melting point. This new foil laminate gives greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints in service, without the loss of adhesion or splitting.
Uses include:
Flashing repair and instillation, sealing lead sheeting, replacing lead and repairing valley gutters.Adheres to:
Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics.Specifications:
Breaking strength: 4.5 N/mm.
Adhesion strength: 4.5 N/mm width.
Temperature range for application: 5°C to 40°C.
Temperature range for service: 80°C (maximum short term).
Thickness: 1.0mm.
Colour: grey. -
Denso Flashing Tape Grey 150mm x 10m Roll
£20.57 Including Tax
( £17.14 Excluding Tax )
Denso Flashing Tape is a tough but conformable, grey aluminium laminate-coated bitumen adhesive with a high melting point. This new foil laminate gives greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints in service, without the loss of adhesion or splitting.
Uses include:
Flashing repair and instillation, sealing lead sheeting, replacing lead and repairing valley gutters.Adheres to:
Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics.Specifications:
Breaking strength: 4.5 N/mm.
Adhesion strength: 4.5 N/mm width.
Temperature range for application: 5°C to 40°C.
Temperature range for service: 80°C (maximum short term).
Thickness: 1.0mm.
Colour: grey. -
Denso Flashing Tape Grey 225mm x 10m Roll
£30.76 Including Tax
( £25.63 Excluding Tax )
Denso Flashing Tape is a tough but conformable, grey aluminium laminate-coated bitumen adhesive with a high melting point. This new foil laminate gives greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints in service, without the loss of adhesion or splitting.
Uses include:
Flashing repair and instillation, sealing lead sheeting, replacing lead and repairing valley gutters.Adheres to:
Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics.Specifications:
Breaking strength: 4.5 N/mm.
Adhesion strength: 4.5 N/mm width.
Temperature range for application: 5°C to 40°C.
Temperature range for service: 80°C (maximum short term).
Thickness: 1.0mm.
Colour: grey.