Showing 265–276 of 734 results
-
£8.38 Including Tax
( £6.98 Excluding Tax )
These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.
APPLICATION:
Used in many applications other than roofing, when joining products together.
Use clearance drill sizes 1mm larger than bolt diameter.
Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.
With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.
-
£3.04 Including Tax
( £2.53 Excluding Tax )
These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.
APPLICATION:
Used in many applications other than roofing, when joining products together.
Use clearance drill sizes 1mm larger than bolt diameter.
Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.
With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.
-
£3.65 Including Tax
( £3.04 Excluding Tax )
These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.
APPLICATION:
Used in many applications other than roofing, when joining products together.
Use clearance drill sizes 1mm larger than bolt diameter.
Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.
With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.
-
£3.74 Including Tax
( £3.12 Excluding Tax )
These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.
APPLICATION:
Used in many applications other than roofing, when joining products together.
Use clearance drill sizes 1mm larger than bolt diameter.
Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.
With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.
-
£3.83 Including Tax
( £3.19 Excluding Tax )
These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.
APPLICATION:
Used in many applications other than roofing, when joining products together.
Use clearance drill sizes 1mm larger than bolt diameter.
Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.
With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.
-
£3.88 Including Tax
( £3.23 Excluding Tax )
These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.
APPLICATION:
Used in many applications other than roofing, when joining products together.
Use clearance drill sizes 1mm larger than bolt diameter.
Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.
With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.
-
£3.48 Including Tax
( £2.90 Excluding Tax )
These Forgefix Sleeve Anchors are through fixing, for ease of use and speed of installation. Their sleeve wedge cones are designed to give maximum expansion even in shallow anchoring depths. They have a reduced outside sleeve diameter compared to thread size for smaller hole sizes, offering reduced stress in base materials.
The anchors are Zinc Yellow Passivated for increased resistance to corrosion and have hexagonal heads.
Also known as ‘Loose Bolt’ sleeve anchors.
APPLICATION
Widely used for fixing balustrades, handrails, racking and holding down machinery, plus many more installation applications.
Ensure the correct socket drive or spanner is used to ensure accurate installation.
The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.
The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
-
£4.09 Including Tax
( £3.41 Excluding Tax )
These Forgefix Sleeve Anchors are through fixing, for ease of use and speed of installation. Their sleeve wedge cones are designed to give maximum expansion even in shallow anchoring depths. They have a reduced outside sleeve diameter compared to thread size for smaller hole sizes, offering reduced stress in base materials.
The anchors are Zinc Yellow Passivated for increased resistance to corrosion and have hexagonal heads.
Also known as ‘Loose Bolt’ sleeve anchors.
APPLICATION
Widely used for fixing balustrades, handrails, racking and holding down machinery, plus many more installation applications.
Ensure the correct socket drive or spanner is used to ensure accurate installation.
The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.
The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
-
£4.84 Including Tax
( £4.03 Excluding Tax )
These Forgefix Sleeve Anchors are through fixing, for ease of use and speed of installation. Their sleeve wedge cones are designed to give maximum expansion even in shallow anchoring depths. They have a reduced outside sleeve diameter compared to thread size for smaller hole sizes, offering reduced stress in base materials.
The anchors are Zinc Yellow Passivated for increased resistance to corrosion and have hexagonal heads.
Also known as ‘Loose Bolt’ sleeve anchors.
APPLICATION
Widely used for fixing balustrades, handrails, racking and holding down machinery, plus many more installation applications.
Ensure the correct socket drive or spanner is used to ensure accurate installation.
The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.
The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
-
£3.86 Including Tax
( £3.22 Excluding Tax )
These Forgefix Sleeve Anchors are through fixing, for ease of use and speed of installation. Their sleeve wedge cones are designed to give maximum expansion even in shallow anchoring depths. They have a reduced outside sleeve diameter compared to thread size for smaller hole sizes, offering reduced stress in base materials.
The anchors are Zinc Yellow Passivated for increased resistance to corrosion and have hexagonal heads.
Also known as ‘Loose Bolt’ sleeve anchors.
APPLICATION
Widely used for fixing balustrades, handrails, racking and holding down machinery, plus many more installation applications.
Ensure the correct socket drive or spanner is used to ensure accurate installation.
The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.
The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
-
£2.39 Including Tax
( £1.99 Excluding Tax )
These Forgefix Sleeve Anchors are through fixing, for ease of use and speed of installation. Their sleeve wedge cones are designed to give maximum expansion even in shallow anchoring depths. They have a reduced outside sleeve diameter compared to thread size for smaller hole sizes, offering reduced stress in base materials.
The anchors are Zinc Yellow Passivated for increased resistance to corrosion and have hexagonal heads.
Also known as ‘Loose Bolt’ sleeve anchors.
APPLICATION
Widely used for fixing balustrades, handrails, racking and holding down machinery, plus many more installation applications.
Ensure the correct socket drive or spanner is used to ensure accurate installation.
The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.
The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
-
£2.64 Including Tax
( £2.20 Excluding Tax )
These Forgefix Sleeve Anchors are through fixing, for ease of use and speed of installation. Their sleeve wedge cones are designed to give maximum expansion even in shallow anchoring depths. They have a reduced outside sleeve diameter compared to thread size for smaller hole sizes, offering reduced stress in base materials.
The anchors are Zinc Yellow Passivated for increased resistance to corrosion and have hexagonal heads.
Also known as ‘Loose Bolt’ sleeve anchors.
APPLICATION
Widely used for fixing balustrades, handrails, racking and holding down machinery, plus many more installation applications.
Ensure the correct socket drive or spanner is used to ensure accurate installation.
The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.
The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
