“Trend 5/1 x 1/4 TCT Hinge Recessor 12.7 x 19mm” has been added to your basket.
View basket
Showing 109–120 of 204 results
-
£86.99 Including Tax
( £72.49 Excluding Tax )
Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.
Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.
Uses:
Trimming plastic or plywood overlay.
Copy profiling – use the bearing to follow a template or base edge of board.
A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
Tooling Tungsten Carbide
1/2in Shank.
-
£70.73 Including Tax
( £58.94 Excluding Tax )
These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering.
Ball bearing and pin guarded cutters enable curved work to be undertaken with bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery.
-
£91.74 Including Tax
( £76.45 Excluding Tax )
These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering.
Ball bearing and pin guarded cutters enable curved work to be undertaken with bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery.
-
£100.31 Including Tax
( £83.59 Excluding Tax )
This Trend 46/390×1/2TC Large Guided Rebater is bearing guided for straight curved work. It is for use with portable or stationary routers and is supplied as standard with ref: BR/191 fitted.There are a variety of bearing rings available to give various rebate sizes. These rings are secured between the two bearings. D: 50.8 mm.C: 22.5…
-
£73.82 Including Tax
( £61.52 Excluding Tax )
This Trend 46/44 Rebater includes different size bearings for a choice of rebates, they provide easy set up and, accurate, depth of cut.This set is ideal for rebating straight and shaped work pieces, particularly with delicate applications such as musical instrument production when a small rebate is required for insertion of purfling. Specifications: Tooling TCT.1/4in…
-
£35.83 Including Tax
( £29.86 Excluding Tax )
Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay. An industrial profiling tool for longer runs of work when a clean finish is needed. Tooling : T.C.T.1/4in Shank.. A Angle = 90° C = 25.4 mmD = 12.7 mm
-
£38.32 Including Tax
( £31.93 Excluding Tax )
Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work.
For profiling and rebating applications only. NOT for plunge, cutting or grooving.
A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
-
£42.02 Including Tax
( £35.02 Excluding Tax )
Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work.
For profiling and rebating applications only. NOT for plunge, cutting or grooving.
A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
-
£26.48 Including Tax
( £22.07 Excluding Tax )
This Trend 47/4 x 1/4 TCT Pierce & Trim Cutter will pierce and cut out an aperture in laminate worktops. The base of the cutter acts as a guide follower. Specifications: Single Flute cutter.Cutting Length: 18mm.Diameter: 6.3mm.Shank. 1/4in.
-
£29.60 Including Tax
( £24.67 Excluding Tax )
Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges.Corners will require final trimming square with a hand chisel or a corner chisel. Diameter: 12.7mm.Cutting length: 19mm.Shank: 1/4in.
-
£21.76 Including Tax
( £18.13 Excluding Tax )
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots
All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice.
HSSE.
One Flute helical Plunge-slotting bit.
-
£24.12 Including Tax
( £20.10 Excluding Tax )
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots
All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice.
HSSE.
One Flute helical Plunge-slotting bit.
