“Trend 8127 Collet Sleeve 8mm to 12.7mm” has been added to your basket.
View basket
Showing 121–132 of 202 results
-
£21.76 Including Tax
( £18.13 Excluding Tax )
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots
All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice.
HSSE.
One Flute helical Plunge-slotting bit.
-
£33.43 Including Tax
( £27.86 Excluding Tax )
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots
All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice.
HSSE.
One Flute helical Plunge-slotting bit.
-
£35.74 Including Tax
( £29.78 Excluding Tax )
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots
All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice.
HSSE.
One Flute helical Plunge-slotting bit.
-
£17.88 Including Tax
( £14.90 Excluding Tax )
Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended.
Should not be used for extensive periods or heavy work.
-
£17.88 Including Tax
( £14.90 Excluding Tax )
Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended.
Should not be used for extensive periods or heavy work.
-
£8.72 Including Tax
( £7.27 Excluding Tax )
Replacement bearing to suit all Trend bearing guided router cutters.
The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
-
£5.18 Including Tax
( £4.32 Excluding Tax )
Replacement bearing to suit all Trend bearing guided router cutters.
The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
-
£17.93 Including Tax
( £14.94 Excluding Tax )
The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.
The 1/4in shank for easy control in smaller routers with ‘K’ mark shank to ensure safe working practices.
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
-
£17.16 Including Tax
( £14.30 Excluding Tax )
The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.
The 1/4in shank for easy control in smaller routers with ‘K’ mark shank to ensure safe working practices.
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
-
£12.41 Including Tax
( £10.34 Excluding Tax )
The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.
The 1/4in shank for easy control in smaller routers with ‘K’ mark shank to ensure safe working practices.
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
-
£11.72 Including Tax
( £9.77 Excluding Tax )
The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.
The 1/4in shank for easy control in smaller routers with ‘K’ mark shank to ensure safe working practices.
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
-
£14.78 Including Tax
( £12.32 Excluding Tax )
The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.
The 1/4in shank for easy control in smaller routers with ‘K’ mark shank to ensure safe working practices.
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
