Open to Trade and DIY Customers Dismiss
Showing 169–180 of 202 results
£55.14 Including Tax
( £45.95 Excluding Tax )
The Trend CR/DWS/B6/FC is a 6 inch x 2.3/8 inch double sided diamond bench stone with monocrystalline diamonds for fast, clean, stock removal which offers excellent sharpening performance. It is double sided for coarse sharpening and fine honing. Coarse 360 grit (nom. 40 microns) and fine 600 grit (nom. 25 microns). The Coarse is ideal…
£18.26 Including Tax
( £15.22 Excluding Tax )
The Trend CR/DWS/CC/FC is a double-sided credit card size diamond stone. It has monocrystalline diamonds for fast, clean, stock removal and excellent sharpening performance. Double sided for coarse sharpening and fine honing. Coarse 360 grit (nom. 40 microns) and fine 600 grit (nom. 25 microns). Ideal for fluted, shaped and small router bits, carbide or…
£75.24 Including Tax
( £62.70 Excluding Tax )
The Trend Door Stand holds the door on its edge while routing hinge recesses and mortices for locks. Holds door securely. Non-scratch base. Adjustable clamp for doors 32 to 55mm thick. Allows door to be tilted back to assist fitting into the frame. Maximum door weight 50kg.
£15.50 Including Tax
( £12.92 Excluding Tax )
The Trend Gauge/1 is a metal rule Depth Gauge to accurately set the height of router cutters and saw blades. It will measure both horizontal and vertical, for hand router, router tables and saw benches. It has a 60mm wide aperture and is accurate to 0.5mm with an 80mm measurement range.This Trend gauge has U…
£13.70 Including Tax
( £11.42 Excluding Tax )
Trend Guide Bushes can be attached to the base of the Router. They are designed to follow the contours of a template.
£17.88 Including Tax
( £14.90 Excluding Tax )
Trend Guide Bushes can be attached to the base of the Router. They are designed to follow the contours of a template.
£13.70 Including Tax
( £11.42 Excluding Tax )
Trend Guide Bushes can be attached to the base of the Router. They are designed to follow the contours of a template.
£13.70 Including Tax
( £11.42 Excluding Tax )
Trend Guide Bushes can be attached to the base of the Router. They are designed to follow the contours of a template.
£362.95 Including Tax
( £302.46 Excluding Tax )
Professional TC Worktop Cutter Two flute cutter with a 12.7 mm (1/2in) diameter.TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Advanced automated grinding improves the carbides resistance to wear.Up to 200% longer life when cutting abrasive materials.Cleaner cut than other existing carbides.Final results & life that makes it the most…
£13.16 Including Tax
( £10.97 Excluding Tax )
The Trend Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that enables cutting both parts of the joint in 15 minutes including setting up.
The jig has the following features:
Left and right hand corners, 400mm radius peninsular joint, 45° end cut with slight radius, 45° trade corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps.
Engraved lines for 65mm bolts and worktop cross-cut.
6 x 10mm diameter ABS plastic pins with tapered shoulders for a tight fit and 3 point pin contact to ensure ease of setting up.
£27.91 Including Tax
( £23.26 Excluding Tax )
The Trend Loc Block consists of four interlocking gripping blocks that lock together to allow the workpiece to be held in place when sanding, drilling and finishing. No need to use clamps. Sets up in seconds by gripping the workpiece and bench, raising the workpiece from the bench, to allow complete access to every edge….
£265.66 Including Tax
( £221.38 Excluding Tax )
The Trend Mortice & Tenon Jig MT/JIG enables mortice, tenons and dowel joints to be cut with a router. Ideal for cabinets, chairs and table joints. There is a one set-up system for both mortice and tenon giving perfectly fitting joints and is fully adjustable for compound angle joints up to 45º. The reversible templates…
