Open to Trade and DIY Customers Dismiss
Showing 37–48 of 55 results
£49.58 Including Tax
( £41.32 Excluding Tax )
The IRWIN Gilbow G67 is a left hand cranked shear suitable for straight cutting and off cutting in a clockwise direction. These Irwin Gilbow G67 11 inch left hand cutting snips have accurately ground edges that ensure the material being cut does not slip out of the jaws and become damaged. The hollow ground jaw…
£26.58 Including Tax
( £22.15 Excluding Tax )
Irwin 20S Offset Snips have offset blades that allow the hand to be kept safely above the cutting work below. Cold formed blades are 44% stronger than hot forged blades and requires 25% less cutting force because of more accurate blade tolerances.
Compound leverage allows for a reduced pressure and faster and easier cutting and a long life spring for increased durability and reliability.
Specification
Length of Cut: 33mm.
Cutting Capacity: Cold Rolled Steel: 18 Gauge 1.02mm, Stainless Steel: 23 Gauge/0.58mm.
£26.58 Including Tax
( £22.15 Excluding Tax )
Irwin 20S Offset Snips have offset blades that allow the hand to be kept safely above the cutting work below. Cold formed blades are 44% stronger than hot forged blades and requires 25% less cutting force because of more accurate blade tolerances.
Compound leverage allows for a reduced pressure and faster and easier cutting and a long life spring for increased durability and reliability.
Specification
Length of Cut: 33mm.
Cutting Capacity: Cold Rolled Steel: 18 Gauge 1.02mm, Stainless Steel: 23 Gauge/0.58mm.
£20.29 Including Tax
( £16.91 Excluding Tax )
Irwin Aviation Snips have precision-formed blades that are cold formed meaning that the blades are stronger for an extended cutting life, require less cutting force, and provide a longer cut per stroke.
The optimised torsion spring gives a consistent and smooth operation with increased reliability and durability. The safety latch is comfortable to reach from handle position with an easy push-up and release and one-handed opening and closing.
The lower blade is serrated, providing more grip and a smoother, consistent cut with no double marked edges. The high-strength alloy steel spines can sustain greater pressure for cutting tougher materials and give increased life.
The compound cutting action, reduces force needed to cut and decreases hand fatigue. The solid over-moulded soft-grips give superior comfort and performance.
£20.29 Including Tax
( £16.91 Excluding Tax )
Irwin Aviation Snips have precision-formed blades that are cold formed meaning that the blades are stronger for an extended cutting life, require less cutting force, and provide a longer cut per stroke.
The optimised torsion spring gives a consistent and smooth operation with increased reliability and durability. The safety latch is comfortable to reach from handle position with an easy push-up and release and one-handed opening and closing.
The lower blade is serrated, providing more grip and a smoother, consistent cut with no double marked edges. The high-strength alloy steel spines can sustain greater pressure for cutting tougher materials and give increased life.
The compound cutting action, reduces force needed to cut and decreases hand fatigue. The solid over-moulded soft-grips give superior comfort and performance.
£20.29 Including Tax
( £16.91 Excluding Tax )
Irwin Aviation Snips have precision-formed blades that are cold formed meaning that the blades are stronger for an extended cutting life, require less cutting force, and provide a longer cut per stroke.
The optimised torsion spring gives a consistent and smooth operation with increased reliability and durability. The safety latch is comfortable to reach from handle position with an easy push-up and release and one-handed opening and closing.
The lower blade is serrated, providing more grip and a smoother, consistent cut with no double marked edges. The high-strength alloy steel spines can sustain greater pressure for cutting tougher materials and give increased life.
The compound cutting action, reduces force needed to cut and decreases hand fatigue. The solid over-moulded soft-grips give superior comfort and performance.
£23.68 Including Tax
( £19.73 Excluding Tax )
Irwin Aviation Snips Utility Cut are designed for applications when a long cut in lightweight material is desired. The precision-formed blades that are cold formed meaning that the blades are stronger for an extended cutting life, requires less cutting force, and provides a longer cut per stroke. The optimised torsion spring gives a consistent and…
£19.22 Including Tax
( £16.02 Excluding Tax )
The Stanley FatMax® Ergo Aviation Snips with black oxide coated blades, with one serrated edge for grip/anti-slip and one smooth edge for an overall cleaner cutting finish with blade markings for increased precision. They stay sharper longer to deliver up to 20x the cutting life of competitive models, which equates to 50,000 cycles per tool (when cutting 22 gauge stainless steel).
Fitted with ergonomic handles that feature a reduced handle span by 20%, to prevent ‘over-stretch’, lowering the stress on the hand and arm muscles. This helps reduce the risk of strain and injury, ultimately less effort is required. Improved handle ergonomics provide better support to the finger and palm grip areas.
Constructed from a chrome molybdenum alloy with a tapered front-end design that allows more manoeuvrability, improving accessibility. Improved pivot bolt design for increased durability, the new low profile design helps with restricted access whilst also improving strength. Fitted with a spring loaded latch, making it easier to open/close.
£19.22 Including Tax
( £16.02 Excluding Tax )
The Stanley FatMax® Ergo Aviation Snips with black oxide coated blades, with one serrated edge for grip/anti-slip and one smooth edge for an overall cleaner cutting finish with blade markings for increased precision. They stay sharper longer to deliver up to 20x the cutting life of competitive models, which equates to 50,000 cycles per tool (when cutting 22 gauge stainless steel).
Fitted with ergonomic handles that feature a reduced handle span by 20%, to prevent ‘over-stretch’, lowering the stress on the hand and arm muscles. This helps reduce the risk of strain and injury, ultimately less effort is required. Improved handle ergonomics provide better support to the finger and palm grip areas.
Constructed from a chrome molybdenum alloy with a tapered front-end design that allows more manoeuvrability, improving accessibility. Improved pivot bolt design for increased durability, the new low profile design helps with restricted access whilst also improving strength. Fitted with a spring loaded latch, making it easier to open/close.
£18.49 Including Tax
( £15.41 Excluding Tax )
FatMax® straight pattern tin snips with serrated cutting edges to prevent slippage when cutting. Forged alloy steel construction. Single pivot action and scissor pattern enclosed handles with a soft touch comfort finish. Cuts up to 18 gauge mild steel 0.7 to 1.2mm. Also suitable for cutting aluminium, sheet uPVC, wire mesh, leather, copper and plastic….
£19.22 Including Tax
( £16.02 Excluding Tax )
The Stanley FatMax® Ergo Aviation Snips with black oxide coated blades, with one serrated edge for grip/anti-slip and one smooth edge for an overall cleaner cutting finish with blade markings for increased precision. They stay sharper longer to deliver up to 20x the cutting life of competitive models, which equates to 50,000 cycles per tool (when cutting 22 gauge stainless steel).
Fitted with ergonomic handles that feature a reduced handle span by 20%, to prevent ‘over-stretch’, lowering the stress on the hand and arm muscles. This helps reduce the risk of strain and injury, ultimately less effort is required. Improved handle ergonomics provide better support to the finger and palm grip areas.
Constructed from a chrome molybdenum alloy with a tapered front-end design that allows more manoeuvrability, improving accessibility. Improved pivot bolt design for increased durability, the new low profile design helps with restricted access whilst also improving strength. Fitted with a spring loaded latch, making it easier to open/close.
£16.01 Including Tax
( £13.34 Excluding Tax )
High leverage compound cutting action snips made from forged alloy steel. Chrome Molybdenum construction with serrated cutting edge to prevent slippage when cutting. The one handed automatic latch releases with the squeeze of the handles which are bi-material for extra comfort and grip. These snips cut up to 18 gauge steel and are suitable for cutting aluminium, sheet uPVC, wire mesh, leather, copper and plastic.
